Mail - D-Link dcs-5000l User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure
what settings to use, check with your e-mail service provider.
SMTP Server This is the domain name or IP address of your external e-mail
Address: server.
SMTP Server This allows you to set the port for the SMTP Server. The
Port: default value is 25, and should only be changed if advised
by your e-mail provider.
Sender e-mail This is the e-mail address listed as the sender for your
Address: notification e-mails.
Receiver This is the e-mail address that your notification e-mails will
e-mail be sent to.
Address:
User Name: If the SMTP server uses authentication, enter your user
name.
Password: If the SMTP server uses authentication, enter your password.
For example, if you want to use Gmail with SSL-TLS for e-mail
notifications, you can follow the setup procedure as below:
Step 1 - Enter "smtp.gmail.com" in SMTP Server Address.
Step 2 - Change the SMTP server port number from 25 to
465.
Step 3 - Enter your gmail e-mail address in Sender E-mail
Address.
D-Link DCS-5000L User Manual

Mail

41 41