Changing Channels during Emergncy
For ALL Emergency signals, when changing channels:
•
If the new channel is also preprogrammed for Emergency,
you can change channels while in Emergency operation. The
emergency alarm or call continues on the new channel.
•
If the new channel is NOT preprogrammed for Emergency,
the display shows No emergency, and you hear an invalid
tone until you exit the Emergency state or change to a
channel preprogrammed for Emergency.
Using the Emergency Keep-Alive Feature
This feature, when enabled, prevents the radio from being
turned off via the On/Off Control Knob when the radio is in the
Emergency state.
Note:
The radio only exits the Emergency state using one of
the ways mentioned in the previous sections.
11/2/15
38
English