Advice On Disposal - Bosch Sensixx B22L Operating Instructions Manual

Problem Possible causes
Water spots appear on Water spots are caused by steam
the garment during use condensation in the hose when cooling
of the "Pulse steam" down after use.
function.
The hose gets hot This is normal. It is caused by the
during use. steam passing through the hose during
steam ironing.
Water leakage from Filter (4*) located at the side of the
the boiler. appliance is loose.
The iron does not stop "Pulse steam" function has been
steaming after placing activated by double click.
it on the pad (2).
If the above does not solve the problem, get in touch with an authorised technical service.
Advice on disposal
Our goods come in optimised packaging. This basically
consists in using nonscontaminating materials which
should be handed over to the local waste disposal service
as secondary raw materials. Your local town council can
give you information about how to dispose of obsolete
appliances.
This appliance is labelled in accordance
with European Directive 2002/96/EG
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment m WEEE).
The guideline determines the framework
for the return and recycling of used
appliances as applicable throughout the EU.
You can download this manual from the local homepages of Bosch.
Solution
Water drops stop coming out of the soleplate
after using the "Pulse steam" function for
some time.
Place the hose on the opposite side so that
you cannot touch the hose during ironing.
Tighten up the filter.
Just press the trigger once again and the iron
will stop steaming at once.
en
1