Rear Panel - Sony BVM-X300 Operating Instructions Manual

Rear Panel

 SDI IN (SDI input) connectors (BNC)
Input connectors for serial digital signals.
For details, see "Connecting the SDI Signals" (page 24).
 SDI OUT (SDI output) connectors (BNC)
Output connectors for serial digital signals.
The  to  connectors outputs the signal that is input
to the corresponding SDI IN connector.
Note
SDI output is only activated when the power is on.
 AUDIO output connector (stereo mini jack)
This is for future function expansion.
When the function is expanded, the audio signal of the
signal which is selected by the input select button on the
front panel is output.
 LAN (10/100) connector
Used for future expansion.
Connect to the LAN (10/100) connector of the network
by using a 10BASE-T/100BASE-TX LAN cable.
CAUTION
 For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
When you connect the LAN cable of the unit to

peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
ATTENTION
Par mesure de sécurité, ne raccordez pas le connecteur
pour le câblage de périphériques pouvant avoir une
tension excessive à ce port. Suivez les instructions pour
ce port.
VORSICHT
Aus Sicherheitsgründen nicht mit einem
Peripheriegerät-Anschluss verbinden, der zu starke
Spannung für diese Buchse haben könnte. Folgen Sie
den Anweisungen für diese Buchse.
 AC IN socket
Connect the supplied AC power cord.
Location and Function of Parts and Controls
15