Adding A Hub - Samsung WAM7500 User Manual

❚

Adding a HUB

An product and a HUB may not pair successfully if the product and HUB are too far apart or are
on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.
The additional HUB amplifies the signal and lets you pair the product to the closest HUB.
1 Set the HUB that is connected to the wireless router
to Pairing mode by pressing its
second.
2 Plug in the new HUB you are using as an extender,
and then press its
3 The newly added HUB's LED indicators turn off and
on, and it switches to Repeater mode.
4 Once the connection between the two HUBs has been
established, the added HUB's (
blinking.
NOTES
If your smart device is not connected to the wireless router
with a Wi-Fi connection, the product will not appear on the
Samsung Multiroom app.
Place the HUB that is in Repeater mode in an appropriate
location between the product and the HUB that is connected to the wireless router.
You can set only one HUB to Repeater mode.
Relocating the product
When relocating your product, refer to the below table.
Wireless router
HUB
Without a HUB
With a HUB
SPK ADD
SPK ADD button for 10 seconds.
If you want to connect your product to
the current wireless router.
Turn off the product, relocate it and then
turn it on.
button for 1
) indicator stops
If you want to connect your product to
Turn off the product, relocate it, then
establish the new connection as described
in the installation instructions on pages 9
through 15.
Connect a LAN cable between the HUB
and the new wireless router, turn on the
HUB, and then turn on the product.
19
Product
Used as a
extender
HUB
a different wireless router.
Click here.