Manually Create Connection - Nokia N800 User Manual

4. In the Pair with device dialog, use the generated passcode
or replace it with a passcode of your own. Define whether
the paired device should be trusted (your phone can
connect to the Nokia N800 without notification) or not
after it is paired, select or unselect
Tap OK, and enter the same passcode on your
compatible phone.
5. After successful pairing, the mobile operator setup wizard
is presented. Use it for saving your internet connection
settings. If you have already saved the settings or plan
to save them later from the
You can access the wizard afterwards by tapping
selecting Tools > Control panel. In the control panel, select
Control panel > Tools > Mobile operator setup
6. Tap Finish to save the settings.
Tip: Set your Nokia N800 as a trusted device from
the Bluetooth connectivity menu of your phone.
This way you allow your Nokia N800 to access your
phone, and you do not have to confirm the
connection every time you activate it. For more
information, refer to the user guide of your phone.
If you change the Bluetooth connectivity name of
your phone, it is not updated to your Nokia N800
automatically. To update the name, pair the
Nokia N800 with your phone again.
Set as trusted device.
Control panel, tap Cancel.
and
wizard....

Manually create connection

To define mobile phone connections manually, tap
select Tools > Control panel >
New. The welcome page of the internet setup wizard is
displayed. Tap Next to proceed to the
Name and type dialog.
1. In the Connection setup: Name and type
following settings:
Connection name—Enter a descriptive name for
the connection.
Connection type:—Select the type of network service over
which you want to access the internet. To use a packet-
switched data service in a cellular network, such as GPRS
(network service), select
switched data service in a cellular network, such as
HSCSD (high-speed circuit-switched data; network
service), select Data call.
2. You must select the network manually if you have not
paired a compatible mobile phone with your device.
Select the type of cellular network over which the
internet connection takes place:
and
Connectivity > Connections
Connection setup:
dialog, define the
Packet data. To use a circuit-
GSM/UMTS or CDMA.
© 2006 Nokia. All rights reserved.
>
23