Turning Your Headset On And Off; Pair It With Your Phone; Wear It How You Like It; How To - Nokia N-GAGE User Manual

Compatible chargers:
• Nokia AC-1
• Nokia ACP-8
• Nokia ACP-9
• Nokia ACP-12
• Nokia LCH-12
• Nokia ACP-7
2

Turning your headset on and off

• Press the answer/end button (See fig. 1) to turn on your headset.
• Press and hold the answer/end button to turn off your headset.

Pair it with your phone

3
Before you use your N-Gage Wireless Dual Headset, you need to pair it with
your mobile phone.
1. Put the headset in pairing mode
• Make sure the headset is on.
• Press and hold (5 sec) the pairing button marked
LED turns solid to indicate pairing mode.
2. Set your mobile phone to 'discover' the N-Gage Wireless Dual Headset
Follow your mobile phone's user guide. This usually involves going to a 'setup,'
'connect' or 'Bluetooth' menu on your mobile phone and selecting the option to
'discover' or 'add' a Bluetooth device. (See fig. 4).
3. Your mobile phone will find the N-Gage Wireless Dual Headset
Your mobile phone then asks if you want to pair with it. Accept by pressing 'Yes'
or 'OK' on the mobile phone and confirm with the passkey or PIN = 0000
(4 zeros).
Headset confirms a successful pairing by 5 LED flashes and confirmation sound. In case
of pairing failure only the sound will be heard, no LED. In case of unsuccessful pairing,
repeat steps 1 to 3.
4
(See fig. 1).
4 4

Wear it how you like it

Wear it how you like it Wear it how you like it Wear it how you like it
The N-Gage Wireless Dual Headset is ready to wear on your right ear. If you prefer the
left, gently rotate the speaker house to fit left ear. (See fig. 2).
To use both earpieces attach the additional earpiece to the Bluetooth unit. Note: when
using both earpieces the Bluetooth unit must be worn on the right ear.
For optimal performance, wear the N-Gage Wireless Dual Headset and your
mobile phone within line of sight. In general, you will get better performance
when there are no obstructions between your headset and your mobile phone.
5

How to...

nswer a call
• Tap the answer/end button (see fig. 1) on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will automatically
transfer to your headset.
Reject a call
• Press the answer/end button when the phone rings to reject an incoming call.
Depending on your phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal.
ctivate voice dialling
• Tap the answer/end button. For best results, record the voice-dialling tag
through your headset. Please consult your phone's user guide for more
information about using this feature.
Redial last number
• Press the answer/end button.
djust sound and volume
• Press the volume up or down (+ or -) to adjust the volume. (See fig 1.)
5