Canon VB-H43 Operation Manual page 173

M207 Memory card removed before unmounting
[warning]
Description Memory card was pulled before unmount.
(M207)
Meaning The memory card was removed while still
mounted.
M208 Video file limit [warning]
Description Video file count of %1 reached upper limit.
(M208)
%1 Video type ([Upload], [Recording-Mode
Stream], [Manual], [Timer], [Event])
Meaning The upper limit for the number of video files
that can be saved for that video type has
been reached.
Logs will be output for [Timer] and [Event]
only when [Overwrite videos] is set to
[Disable].
M301 memory card control module error [err]
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
HTTP Server Messages
H143 User name specification error [notice]
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
H144 Password specification error [notice]
Description (http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
H201 Timeout disconnect [warning]
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
System Messages
S001 System started [info]
Description starting paramd (S001)
Meaning Parameter management module started.
S002 System settings changed [info]
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
S010 Event service started [info]
Description starting event (S010)
Meaning The event service was started.
S011 Event service shut down [info]
Description shutdown event (S011)
Meaning The event service was shut down.
S012 External device service started [info]
Description starting extio (S012)
Meaning The external device input/output service
was started.
S013 External device service shut down [info]
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
S014 Timer service started [info]
Description starting timer (S014)
Meaning The timer service was started.
S015 Timer service shut down [info]
Description shutdown timer (S015)
Meaning The timer service was shut down.
List of Log Messages
7
173