Connect Two A2Dp Devices At The Same Time; Disconnect The Car Kit; Clear The List Of Paired Devices - Nokia CAR KIT CK-100 User And Installation Manual

G e t t i n g s t a r t e d
To start the search, press and hold the Navi wheel for about 2 seconds.
During the search, the blue indicator light of the input device flashes
slowly. The car kit first tries to connect to the phone that was last used
with it and, if this fails, then to one of the other phones that have been
most recently paired with it. (To stop the search, press and hold the Navi
wheel for about 2 seconds.)
To manually connect your music device to the car kit, see the user guide
of the device.

Connect two A2DP devices at the same time

You can use the car kit with a mobile phone and a music device that
support the A2DP Bluetooth profile at the same time.
If your phone supports the A2DP Bluetooth profile but you want to use
your music device instead to listen to music, connect the music device
to the car kit before the phone.

Disconnect the car kit

To disconnect the car kit from your device, close the connection in the
Bluetooth menu of your device, or switch off the car kit.
You do not need to delete the pairing with the car kit to disconnect it.

Clear the list of paired devices

The car kit saves the pairing information about the last eight Bluetooth
devices that have been paired with it. To clear this information, switch
off the car kit, and press and hold the Navi wheel for over 5 seconds. The
car kit plays a voice prompt or a short beep.
10