Mac Filtering - D-Link AC750 User Manual

Section 3 - Configuration
Use MAC Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to
the Router.
Configure MAC
Select Turn MAC Filtering OFF, Turn MAC Filtering ON and
Filter: ALLOW computers listed to access the network, or Turn
MAC Filtering ON and DENY computers listed to access
the network.
Enable:
Check the box to the left of the filter to enable.
MAC Address:
Enter the MAC address you would like to filter. To find the
MAC address on a computer, please refer to the Networking
Basics section in this manual.
DHCP Client
Select a DHCP client from the drop-down menu and click the
List:
<< button to populate the required fields.
D-Link DIR-813 User Manual

MAC Filtering

29