Install Firmware - Panasonic LE60 Tuner Firmware Installation Instructions

5

Install Firmware

CAUTIONS:
• Do not turn the TV OFF or press any buttons on the TV while the firmware
update is in progress.
• Do not remove the SD Card from the SD Card Slot during the firmware update
process.
1) Power the TV ON.
2) Insert the SD Card with the firmware update vertically into the SERVICE ONLY Slot on
the back of the TV with the SD Card label facing outwards.
3) Perform the actions requested on the TV screen until a message indicating the firmware
update is complete, then:
• Remove the SD Card from the TV's SD Card Slot.
• Power the TV OFF.
• Unplug the power cord from the electrical outlet for at least 30 seconds.
• Re-plug the power cord into the electrical outlet.
• Power the TV ON.
CAUTION: Do not power the TV off or press any buttons if an initializing or
updating message is displayed.
4) Complete the FIRST TIME
• Select the Language.
• Set the Clock.
• Program the Channels.
LE60 / LX60 / LX600 LCD TV Tuner Firmware Installation Instructions
SETUP.
Page 10 of 10