Display Brightness; Tone Settings - Nokia 6800 User Manual

Screen saver
A digital clock screen saver is used for power saving in standby mode. It is
activated when no function of the phone has been used for a certain time while
the phone's flip is closed. Press any key to deactivate the screen saver or open the
flip. The screen saver is also deactivated when the phone is out of the network
coverage area.
Press Menu and select Settings,
the timeout after which the screen saver will be activated. The length of the
timeout can vary from 5 seconds to 60 minutes.
Note that the screen saver overrides all graphics and texts on the display in
standby mode.

Display brightness

You can change the brightness level of the phone display.
Press Menu and select Settings,
joystick to the left to decrease and to the right to increase the brightness level,
and press OK to accept it.

Tone settings

Press Menu and select
in the Profiles menu, see
make, will change the settings in the active profile.
Select Incoming call alert
voice call. The options are Ringing, Ascending,
Copyright
Display settings
Display settings
Settings and Tone settings. You can find the same settings
Profiles (Menu 3) on page 93. Note that the settings you
to choose how the phone notifies you of an incoming
‹
2003 Nokia. All rights reserved.
and Screen saver timeout. Select
and Display brightness. Move the
Ring once, Beep once and Off.
102