Profiles; Sensor Settings; Voice Commands - Nokia 6710 Navigator User Manual

Profiles

Select Settings > Profiles.
>
You can adjust and customise the ringing tones, alert tones,
and other device tones for different events, environments, or
caller groups. The active profile is shown at the top of the
display in the home screen. However, if the active profile is
General, only today's date is shown.
To create a new profile, select
define the settings.
To customise a profile, select a profile and
Personalise.
To change a profile, select a profile and
Activate. The Offline profile prevents your device from
accidentally switching on, sending or receiving messages, or
using wireless LAN, Bluetooth connectivity, GPS, or FM radio;
it also closes any internet connection that may be in
operation when the profile is selected. The Offline profile
does not prevent you from establishing a wireless LAN or
Bluetooth connection at a later time, or from restarting the
GPS or FM radio, so comply with any applicable safety
requirements when establishing and using these features.
To set the profile to be active until a certain time within the
next 24 hours, scroll to the profile, select

Voice commands

Before using voice tags, note the following:
● Voice tags are not language-dependent. They are
dependent on the speaker's voice.
© 2009 Nokia. All rights reserved.
Options Create new, and
>
Options
>
Options
>
Options
>
Timed, and set the time. When the time expires, the profile
changes back to the previously active non-timed profile.
When the profile is timed,
The Offline profile cannot be timed.
To delete a profile that you created, select
profile. You cannot delete the predefined profiles.
Important: In the Offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.

Sensor settings

Mute calls or snooze alarms by turning the phone.
Select Settings
> >
settings.
Select from the following:
Sensors — Activate the sensors.
●
Turning control — Mute calls or snooze alarms by turning
●
your device.
● You must say the name exactly as you said it when you
recorded it.
is displayed in the home screen.
Options
Settings and General
>
Delete
>
Sensor
55