Table of Contents
Advertisement
2.
Your phone
Standby mode
When the phone is ready for use, and you have not keyed in any characters, the phone is in standby mode.
1 — Shows the name of the network or the operator logo to indicate the cellular network in which the phone is currently
being used.
2 — Shows the signal strength of the cellular network at your current location. The higher the bar, the stronger the signal.
3 — Shows the battery charge level. The higher the bar, the more power in the battery.
4 — The left selection key
To view the list of functions that you have on your personal shortcut list, press
press Select.
To add more functions to the shortcut list, press Options, select
Scroll to a function, and press
To arrange the functions on the shortcut list, press Options, and select Organise. Scroll to the function that you want to
move, press Move, and select where you want to move the function.
If there are no functions in the shortcut list, press
5 — The middle selection key
6 — The right selection key
access an operator's homepage, or a specific function that you have selected in the
shortcuts on page 38.
Wallpaper and screen savers
• You can set your phone to display a background picture, wallpaper, when the phone is in standby mode.
• The phone automatically activates the digital clock screen saver on the display in standby mode after a certain length of
time if no phone function is used. Note that if you have not set the time, 00:00 is displayed.
Some useful shortcuts in standby mode
• To access the list of dialed numbers, press
number.
• To call your voice mailbox, press and hold
• To make a connection to a browser service, press and hold
• To open the push to talk
• To find a contact name, press
• To start writing a text message, press
• To open the camera viewfinder in standard photo view, press
video, press and hold
Keypad lock (Keyguard)
The keyguard disables your keypad to prevent accidental key presses.
When the keypad lock is on, calls still may be possible to the official emergency number programmed into your device. Key in
the emergency number and press
• To lock the keypad in standby mode, press
• To unlock the keypad, press
• To answer a call when the keyguard is on, press
reject a call, the keypad automatically locks again. You can set whether the keyguard locks automatically or requires a
code to unlock.
Copyright © 2004 Nokia. All Rights Reserved.
in standby mode is
Go
Mark
to add it to the shortcut list. To remove a function from the list, press Unmark.
Add
in standby mode is Menu.
in standby mode may be
. Scroll to the number or name that you want, and press
.
Group
list, press
.
.
.
or
.
.
Menu
Unlock
and
within 1.5 seconds.
to. You can use the key as a shortcut to your favorite functions.
Select
options, and the list of available functions is shown.
to add a function.
Names
to access the
.
. To quickly change the camera mode, for example
and
within 1.5 seconds.
. During a call, the phone can be operated normally. When you end or
13
Go
to. To activate a function, scroll to it, and
Contacts
menu, an operator-specific key to
Right selection key
menu.
See Personal
to call the
Advertisement
Table of Contents
