•
Second. name server:
Note: If you need to enter the
Second. name
obtain these addresses.
The following settings are shown if you have selected data call and high
speed data as the connection type:
•
Use callback
- This option allows a server to call you back once you
have made the initial call, so you have a connection without paying
for the call. Contact your service provider to subscribe to this service.
Note: Charges may apply for certain types of received calls, such as
roaming and high speed data calls. Contact your GSM service
provider for more information.
Note: The phone expects the callback call to use the same data call
settings that were used in the callback-requesting call. The
network must support that type of call in both directions, to and
from the phone.
•
Callback type
service provider for the correct setting to use; it will depend on the
service provider's configuration.
•
Callback number
dial back server uses. Usually, this number is the data call phone
number of your phone.
•
Use PPP compression
transfer, if supported by the remote PPP server. If you have problems
with establishing a connection, try setting this to No. Contact your
service provider for guidance.
Glossary: PPP (Point-to-Point Protocol) - a common networking software
protocol that enables any computer with a modem and a phone line to
connect directly to the Internet.
•
Use login script
•
Login script
- Insert the login script.
- The IP address of the secondary DNS server.
Phone IP
server:, contact your Internet service provider to
- The options are
- Key in your phone's data phone number which the
- When set to Yes, this option speeds up the data
- The options are
[ 53 ]
address,
Primary name
Use server no.
/
Use other no.
Yes
/ No.
server, or
Ask your