The Macro Function (Macro); Programming A Macro; Running A Macro - Silvercrest SFB 10.1 C3 User Manual And Service Information

SilverCrest SFB 10.1 C3
3. Press
The display reads "SURE DELET".
4. Press
"DELETE ALL".
Press to go back one menu level. To return to the start window,
press one of the device buttons.

The macro function (MACRO)

The macro function lets you save up to 16 commands for a device that
will be sent in sequence when pressing one single button.
Example: Power on TV > Select channel 11 > Display Teletext > Open
Teletext page 222.

Programming a macro

1. Press and hold the
2. Press
3. Press
"MACRO6" and press
4. The display reads "SET UP". Press
5. If you select a macro that already has a command sequence
assigned, the display reads "MACRO HAS". In this case you have to
delete this macro before entering commands or select a different,
free macro.
6. The device currently selected is shown.
7. Enter the button commands sequence you want. Always start with the
device button of the device you want to record the macro for,
otherwise the message "ERROR KEY" appears.
8. By default, the different macro commands are transmitted
sequentially every second. As this could be too fast for some devices,
you can adjust the delay time in 2-second increments from 5 to 21
seconds.
9. To do this, press the button
of the button delays the pause time after the last command for 2
more seconds and the set value is shown on the display.
10. After you have finished entering the command sequence, press
. The display reads "SUCCESS".
You can press up to 16 buttons per macro, including the device button.
After this, the macro is applied automatically and the display reads
"SUCCESS".
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Running a macro

1. Press the
2. Within the next 5 seconds, press the number button 1 to 6 which
corresponds to the macro you want.
3. The command sequence programmed for this macro is sent.
22 - English
, select "DELETE ALL" and press
to confirm. The display reads "DELETED" and then again
, select "MACRO" and press
, select "MACRO1" (or "MACRO2".....
button.
button for 3 seconds.
to confirm.
to confirm.
after a button command. Each press
to confirm.
to confirm.