Config Wizard Screen (Basic Mode); Sp Type (Speaker Type); Sp Series (Speaker Series); Sp Model (Speaker Model) - Yamaha PX10 Reference Manual

CONFIG WIZARD screen (Basic mode)

Using the Configuration Wizard enables you to easily set basic functions.
WARNING
The volume changes depending on the setting. Carry this out with the volume lowered for
safety.
NOTE
Items that can be set differ between Basic mode and Advanced mode. To make detailed settings,
switch to Advanced mode. Refer to "To switch between Basic mode and Advanced mode" (page 12)
for switching the mode.
 SP TYPE (speaker type)
Selects the combination of the speakers for connection.
• FULL + FULL:
When connecting full-range speakers to the [SPEAKERS] terminals of both channels A
and B.
• SUB + SUB:
When connecting subwoofers to the [SPEAKERS] terminals of both channels A and B.
• FULL + SUB:
When connecting a full-range speaker to the [SPEAKER] terminal of channel B and a
subwoofer to the [SPEAKER] terminal of channel A.
Panel Operation — CONFIG WIZARD screen (Basic mode)
 SP SERIES (speaker series)
Selects a speaker series for connection from models registered in the PX amplifier.
NOTE
When a speaker is selected, filters, speaker impedance, and threshold of the limiter are set auto-
matically. If the speaker for connection is not in the menu, select "GENERIC."
 SP MODEL (speaker model)
Specifies a speaker for connection from the speaker series selected in the SP SERIES
screen.
20
PX10/PX8/PX5/PX3 Reference Manual