●
Conductive foam
Conductive tabletop workstations with ground cord of one-megohm +/- 10% resistance
●
●
Static-dissipative table or floor mats with hard tie to ground
Field service kits
●
●
Static awareness labels
Wrist straps and footwear straps providing one-megohm +/- 10% resistance
●
●
Material handling packages
Conductive plastic bags
●
●
Conductive plastic tubes
Conductive tote boxes
●
●
Opaque shielding bags
●
Transparent metallized shielding bags
●
Transparent shielding tubes
Operating guidelines
To prevent overheating and to help prolong the life of the computer:
●
Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.
●
Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides
of the computer to permit the required airflow.
●
Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter
can block the vents and limit the airflow. Be sure to unplug the computer before cleaning the air vents.
Never operate the computer with the cover removed.
●
●
Do not place computers so near each other that they are subject to each other's re-circulated or
preheated air.
●
Keep liquids away from the computer and keyboard.
●
Install or enable power management functions of the operating system or other software, including
sleep states.
Routine care
General cleaning safety precautions
1.
Never use solvents or flammable solutions to clean the computer.
2.
Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and then use
the cloth on the component.
3.
Always unplug the computer when cleaning with liquids or damp cloths.
4.
Always unplug the computer before cleaning the keyboard, mouse, or air vents.
Operating guidelines
15