Building In The Coffee Machine - Miele TX3587 Operating And Installation Instructions

Building in the coffee machine

Before installation make sure that
there is no power supply to the
machine. This also applies should it
ever need to be taken out of its
housing unit.
The machine may only be operated
when built-in and in an ambient
temperature range between +10 °C
to +38 °C.
You will need two Allen keys (size 3
and 5) for installing the machine.
To align the machine front with the
furniture front ensure that there is a
sealing strip provided all the way
around the building-in niche or around
the coffee machine.
 If the housing unit niche is not fitted
with a sealing strip you should fit a
Miele sealing strip to the machine
before installing it. This is fitted from
the back of the machine.
The sealing strip is available to order
from Miele.
Tip: It is useful to have somewhere at
the height of the niche to place the
machine on. This makes electrical
connection easier.
 Using the large allen key, unscrew all
four feet out by 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
 Connect the machine to the electrical
supply.
Take care not to damage the
electrical connection when pushing
the machine into the niche.
 Push the coffee machine all the way
into the niche until you feel a
resistance.
 Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. If this is not the case, realign
the machine using the four feet.
Installation
91