Fcc Compliance Statement - JVC VN-T16U Instructions Manual

FCC Compliance Statement

Connect only one camera to the power line,
AC24V/DC12V. Do not share the power line with other
Caution
equipment. The power cable between power source and
the camera must be under 3 m.
When powering the camera from AC24V, a UPS source
Caution
should be considered to ensure satisfactory performance.
Information to the user: This equipment has been tested and found to
comply with the limits for a Class A digital device, Pursuant to Part 15 of the
FCC Rules; these limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference. For example, try
reorienting or relocating the receiving antenna, increasing the separation
between the equipment and receiver, or connecting the equipment to an outlet
on a different circuit.
Changes or modifications not expressly approved by the party
Caution responsible for compliance could void the user's authority to
operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
3