Finishing The Installation; Troubleshooting - D-Link DGE-530T Quick Installation Manual

Gigabit pci desktop adapter

Hide thumbs Also See for DGE-530T:

Table of Contents

Available languages

Secure the DGE-530T with the screw from the back plate.

Replace your computer's cover.

Finishing the Installation

Reconnect the power cord and power on the computer.

Windows should automatically detect and install the adapter.

If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".

1. If I've lost my CD, what can I do?

The CD contains software drivers and manual which can be obtained from D-Link (see

Technical Support below). Windows 2000 or XP in most cases will automatically install the

correct drivers.

2. What do I do if the installed card does not seem

to function properly?

 Check that the card appears under

START>CONTROLPANEL>SYSTEM>HARDWARE

>DEVICE MANAGER>NETWORK ADAPTERS.

 If it does not appear, make sure you have inserted

the PCI card correctly or try inserting the card into

an alternative PCI slot.

 If it appears with an error "!" or "?", remove or

uninstall the device by right clicking on the device.

Restart the computer, upon restart Windows will

redetect it. If error persists, try removing the card

and uninstalling the driver. Repeat the installation

process.

Table of Contents