Bosch PSR 10,8 LI Original Instructions Manual page 44

OBJ_BUCH-623-003.book Page 44 Thursday, February 5, 2009 4:00 PM
44 | English
Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the
nameplate of the battery charger. Battery chargers
marked with 230 V can also be operated with 220 V.
Note: The battery is supplied partially charged. To ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for
the first time.
The lithium ion battery can be charged at any time with-
out reducing its service life. Interrupting the charging pro-
cedure does not damage the battery.
The Li-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the bat-
tery is empty, the machine is switched off by means of a
protective circuit: The inserted tool no longer rotates.
Do not continue to press the On/Off
WARNING
switch after the machine has been auto-
matically switched off. The battery can be damaged.
The charging procedure starts as soon as the main plug of
the battery charger is inserted into the socket and the
cordless screwdriver is afterwards placed on the battery
charger 10.
The battery charge-control indicator 5 indicates the
charging progress. During the charging procedure, the in-
dicator flashes green. The battery is fully charged when
the indicator lights up green continuously.
During the charging procedure, the handle of the machine
warms up. This is normal.
Disconnect the battery charger from the mains supply
when not using it for longer periods.
2 609 003 652 | (5.2.09) Bosch Power Tools