Telnet Access; Secure Shell; Configuring Ssh - Nokia IP40 User Manual

8
Configuring Network Access
3. Select (Access from) from the drop-drown list for HTTPS, SSH, and SNMP Access control.
You can select one of the following:

Telnet Access

Note
Telnet access is disabled by default. To allow Telnet access from the LAN, WAN, and DMZ,
configure separate user rules.
For more information about Telnet access to Nokia IP40, see
IP40 Security Platform"

Secure Shell

Nokia IP40 supports SSH 2.0. The SSH feature in IP40 provides secure remote access to the
appliance. In addition, SCP is supported to enable secure upgrade of the device, downloading of
public keys, HTTPS certificates, import and export features.

Configuring SSH

To start using SSH remotely, first set IP40 to accept requests from SSH clients.
To enable IP40 to accept SSH requests
1. On the main menu, click Setup
The Setup window appears
2. Click the Management tab.The Management page appears.
112
Internal Network—you can access the device only when you are within a LAN.
Internal Network +VPN—you can access the device when you are in a LAN or
connected through VPN.
IP Address Range—only specified computers with a given IP address range can access
the device.
ANY—you can access the device from any location.
on page 60
"Using Telnet to Connect to Nokia
Nokia IP40 Security Platform User's Guide v1.1