Speaker - HP EliteDesk 705 G2 Maintenance And Service Manual
Microtower business pc
Hide thumbs
Also See for EliteDesk 705 G2:
- Hardware reference manual (58 pages) ,
- Product end-of-life disassembly instructions (17 pages) ,
- Disassembly instructions manual (13 pages)
Table of Contents
Advertisement
NOTE:
After installing a new processor onto the system board, update the system ROM to ensure that the
latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at:
http://h18000.www1.hp.com/support/files.
Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the speaker wire from the system board connector labeled SPKR (1) and remove the wire
from the clip (2).
4.
From the inside of the chassis, remove the silver Torx T15 screw (3) that secures the speaker to the
chassis.
5.
Remove the speaker from the chassis (4).
To replace the speaker, reverse the removal procedures.
46
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
(Preparation for disassembly on page
(Access panel on page
20).
19).
Hide quick links:
Advertisement
Table of Contents
