Defining Criteria - Motorola ET1 Integrator Manual

Rule Screen
Figure 4-13
Touch the Rule enabled checkbox to enable the current rule.
2.

Defining Criteria

To define a criteria:
Touch Criteria. The Criteria screen appears.
1.
Criteria Screen
Figure 4-14
Touch String to check for option to specify the string that must be present in the data.
2.
In the Enter the string to check for dialog box, enter the string and then touch Done.
3.
Touch OK.
4.
Touch String position option to specify the position of the string specified in the String to check for
5.
option. The ADF rule is only applied if the specific string in String to check for is found at the specified
String position location (zero for the start of the string).
Touch the + or - to change the value.
6.
Touch OK.
7.
Touch String length option to specify a length for the received data. The ADF rule only applies to the bar
8.
code data with that specified length.
Touch the + or - to change the value.
9.
Touch OK.
10.
DataWedge Configuration 4 - 23