Husqvarna TE 250 Workshop Manual page 17

GENERAL
ELECTRICAL COMPONENTS LOCATION (TE-SMR)
The ignition system includes the following elements:
- Generator, in oil bath, on the inner side of L.H. crankcase cover;
- Electronic ignition coil under the fuel tank;
- Electronic power unit under the fuel tank;
- Voltage regulator under the fuel tank;
- Spark plug on the R.H. side of cylinder head;
- Starting motor 12V-450W behind the cylinder;
- Electric start remote control switch on the L.H. side of the rear frame;
- M.A.Q.S. sensor (pressure, accelerator control position, air temperature) on the throttle body.
The electric system includes the following elements:
- Headlamp with two filaments bulb of 12V-35/35W and parking light bulb of 12V-3W;
- Rear tail-light with stop bulbs of 12V-21W and parking light bulb of 12V 5W;
- Turn signals bulb of 12V-10W;
- Two 15A fuses and one (13) 20A fuse on the right side of the rear frame;
- Battery 12V-6Ah under the saddle;
- Relay for the electric fan, on the R.H. side of the frame;
- Injection and lighting system relays on the left side of the frame;
- Coolant temperature sensor;
- Electric fan;
- Turn signal flash device on the left side of the rear frame;
- Lambda probe;
- Fall sensor (SMR) on the right side of the rear frame;
- Fuel pump in the tank.
ELECTRICAL COMPONENTS LOCATION (TC-TXC-SMR 450-R)
The ignition system includes the following elements:
- Generator on the inner side of L.H crankcase cover;
- Electronic coil and condenser (TC-TXC) under the fuel tank;
- Electronic central unit under the fuel tank;
- Voltage regulator under the fuel tank;
- Spark plug on the right side of the cylinder head;
- 12V- 450W starting motor behind the cylinder;
- Electric start remote control switch on the left side of the rear frame;
- Potentiometer on the carburettor.
The electric system includes the following elements:
- 12V-6Ah battery under the saddle;
- Two 20° fuses mounted on the electric start remote control switch (TXC-SMR 450-R).
Part. N. 8000 B0148 (02-2008) A.7