Removing The Bottom Panel; Using The Reset Button - D-Link DCS-2310L User Manual

Section 1: Product Overview
Step 1:
Place the camera face down on a non-slip flat surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin flat blade.
Step 3:
Undo the two screws using a Philips #00 Screwdriver.
Step 4:
Lift off the protective panel.
If you need to install a microSD Memory Card please skip to "Installing a microSD Memory
Card" on page 15. If you need to use the Reset Button follow the steps below.
Step 1:
Follow the steps outlined in "Removing the Bottom Panel" on page 14
Step 2:
Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset
the device to it's factory settings.
Step 3:
Follow the steps outlined in "Reattaching the Bottom Panel" on page 15.
D-Link DCS-2310L User Manual

Removing the Bottom Panel

Using the Reset Button

2
3
4
2
14