Setting Felica Lock - Hitachi w42h User Manual

Setting FeliCa Lock

You can restrict the use of EZ FeliCa by setting FeliCa Lock on. Incidentally,
you can temporarily release the FeliCa Lock and use EZ FeliCa for a certain
period of time by holding down r for about one second while the standby
screen is displayed and entering the lock number (quick release).
While the standby
screen is displayed,
press c4151.
Press 1 (ON), enter the
lock number, and then
press c (OK).
The FeliCa Lock is set.
If the battery discharges while the FeliCa Lock is on, you will be unable to
release the FeliCa Lock. Be careful of the battery level. When your battery
is discharged, recharge the battery then release the FeliCa Lock to use EZ
FeliCa.
◎ When FeliCa Lock is set,
◎ In case you lost W42H, you can set the FeliCa Lock by
setting Remote Auto Lock. Remote Auto Lock requires
the initial setup beforehand.
◎ Even if you set Auto Lock, the FeliCa Lock will not be set.
■ Releasing FeliCa Lock temporarily (quick release)
When the FeliCa Lock is on, hold down r for about one second while the standby
screen is displayed, and then enter the lock number.
The vibrator works, "FeliCa Lock Quick Releasing" is displayed and the FeliCa
Lock is temporarily released.
If you press F or when "Quick Release" (about 5 minutes is set at the
◎
time of purchasing) elapses, W42H returns to FeliCa Lock status.
◎ You cannot start FeliCa-supported EZ apps while FeliCa Lock is
80
temporarily released
appears on the standby screen.