Specifications; Standard Accessories - Hitachi W 4YD Technical Data And Service Manual

5. SPECIFICATIONS

5-1. Specifications
Capacity
Type and number of screws
Mounting method of bit
Power supply
Type of motor
Enclosure
Type of switch
Handle configuration
Rated current
Power input
No-load speed
Without cord
Weight
Packaged
Packaging
Overall length x Overall height x Overall width

Standard accessories

5-2. Standard Accessories
(1) + driver bit No. 2 136.4L [Code No. 324134]
(2) Hook ass'y [Code No. 320287]
(3) Rubber cover set [Code No. 324157]
(4) Sheet [Code No. 324183]
(5) Case [Code No. 310904]
D4 x 25 - - - 41 mm (5/32" dia. x 1" - - - 1-5/8")
Collated screw strips (50 screws)
6.35 mm (1/4") (Dihedral width)
Single phase AC 50/60 Hz, voltage 240 V and 230 V
Single-phase series commutator motor
Housing (A) and (B): Polycarbonate resin + Elastomer
Slider case (A) and (B), slider (A) and (B): Polycarbonate resin
Stopper: Stainless steel
On-off switch with stopper
D-type
2.1 A (240 V) and 2.2 A (230 V)
470 W
4,700 min -1
1.7 kg (3.7 lbs.)
3.1 kg (6.8 lbs.)
Corrugated cardboard box (with a plastic case)
335 x 198 x 78 mm (13-3/16" x 7-25/32" x 3-1/16")
+ driver bit No. 2 136.4L (attached to the main body) ....... 1 pc.
Hook ass'y (attached to the main body) ............................ 1 pc.
Rubber cover set ............................................................... 1 pc.
Sheet (one sheet is attached to the main body) ................ 3 pcs.
Case (plastic) .................................................................... 1 pc.
--- 5 ---