Panasonic DBS 576 User Manual page 22

2. Setting Up Your Phone
To program a one-touch key for an outside number
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Dial the phone number to be stored.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To assign an SSD number to a one-touch key
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the AUTO key.
5. Enter the SSD bin number to be programmed.
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a one-touch key
Note: **When the system is set up for MCO Code level, it is programmed to
automatically dial an outside line. (MCO Code level requires system programming.)
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. **If the feature functions at the MCO Code level, press AUTO * #.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
22 DBS 576 (USA), issued January 1999 576-25-750