Sleep Timer Function; Setting The Clock - LG FA162 Owner's Manual

Setting the Clock

1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour
time system by tapping ./>.
v v v v v v
(12HR)
3. Press SET to confirm the selected hour time
system.
4. Tap ./> on the front panel to set the
correct hours.
5. Press SET.
6. Tap ./> on the front panel to set the
correct minutes.
7. Press SET and the correct time is shown on
the display window.
8. Press CLOCK at any time to display the
time for about 5 seconds.
Note:
If you want to reset the clock, press and hold
CLOCK for more than 2 seconds.
10
or
(24HR)
Timer Function
With the TIMER function, you can have the radio
reception, CD play and USB play turned on and
off at the desired time.
1. Press CLOCK to check the current time.
(If you don't set clock, the timer function
doesn't work.)
2. Press TIMER to enter the timer setting
mode. If you want to correct the previous
memorized TIMER setting, press and hold
the TIMER for more than 2 seconds.
- The previously memorized timer on the
time and " " indicator appears in the
display window.
3. Each function (TUNER → CD → USB)
flashes in the display window in turn. Press
SET when the desired function is flashing.
4. a. When you select the TUNER function,
select the previously memorized preset
number by tapping ./ > on the front
panel and press SET.
- If you don't set the preset stations, it is
set to current frequency.
b. When you select the CD or USB function,
- "ON TIME" indicator appears for about
0.5 seconds in the display window and
then disappears.
5. Set the hour to switch on by tapping
./> on the front panel.
6. Press SET.
7. Set the minute to switch on by tapping
./> on the front panel.
8. Press SET.
- "OFF TIME" indicator appears for about
0.5 seconds in the display window and
then disappears.
9. Set the hour to switch off by tapping
./> on the front panel.
10. Press SET.
11. Set the minute to switch off by tapping
./> on the front panel.
12. Press SET.
13. Adjust the volume level by tapping ./>
on the front panel.
14. Press SET.
" " appears in the display window and the
timer setting has been completed.
15. Switch the system off.
The selected function is automatically
switched on and off at the time set.