Before you start the installation please take care of the following:
•
Park the vehicle in a save spot, applying parking brake and remove the ignition key
•
Be sure not to damage any vehicle parts
•
Disconnect the battery
•
Revert to the service manual for further safety details
•
This manual could be changed for better instruction, and / or changes in the installation
instructions
•
Be sure to have the latest version of this manual. Please check
To connect the CAW-KIMUN1 module use the "Plug & Play" harness for the specific type of car and
model.
After the complete installation, the CAW-KIMUN1 will auto detect the car's protocol. This operation
will be shown with fast red flashes of the LED on the CAW-KIMUN1. Once the car's protocol is
recognized the LED of the CAW-KIMUN1 will turn into GREEN, confirming the correct setting.
Connect to the radio antenna plug
(Depending on Plug and Play cable)
2
INSTALLATION
Connect to the OEM
Connector *
* Vehicle specific cable needs to be ordered individually
www.kenwood.eu
Connect to
the ISO
connector
Connect to
the EXT i/F
connector