Download Print this page

Advertisement

Quick Links

MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200C
CHAP:1 HARDWARE OVERVIEW
SECT:1.1
1.1 GENERAL
Toshiba Personal Computer is a compact and advanced portable personal
computer. The T5200 is a high-performance system with special features.
The CPU is the 80386-20 32-bit microprocessor, operated at 20 MHz with
32 Kbytes high speed cache memory.
The hard disk drive (HDD) has a capacity of 100 Mbytes (T5200/100
model) or 40 Mbytes (T5200 model)
The floppy disk drive (FDD) can support 2DD (720 Kbytes) and 2HD (1.44
Mbytes) floppy disks.
The standard memory has a capacity of 2 Mbytes, expandable up to 8
Mbytes maximum.
The plasma display supports high resolution video graphics (VGA
compatible) with 640 by 480 pixels (dots) and 16-levels of gray scale.
The display mode is three mode, CGA mode, VGA-color mode, and
VGA-monochrome mode.
The keyboard has 91/92-key with the keys of a subset of the
industry standard 101/102-key keyboard. For most
applications it can be used exactly like a standard
typewriter keyboard.
The universal auto-sensing power supply is used for world- wide usage.
The T5200 includes two internal IBM compatible expansion slots (one
full lenge 16-bit slot and one half
T3100 size expansion slot.
The interface connector has one PRT/EXT. FDD connector (25-pin), two
serial connectors (9-pin), and VGA connector (15-pin).
<fig id=MMS\5200\52001_1.TIF>Figure 1-1</fig> T5200 personal computer
<fig id=MMS\5200\52001_2.TIF>Page 1-2</fig>
SYSTEM UNIT
The configuration of the system unit is shown in figure 1-2.
<fig id=MMS\5200\52001_2.TIF>Figure 1-2</fig> System unit configuration
<fig id=MMS\5200\52001_3.TIF>Page 1-3</fig>
The key features of the system unit are:
o
A system board, memory board, I/O board, high resolution
graphics subsystem (HRGS) board, back panel board, and LED
board.
o
An internal 3.5-inch floppy disk drive (FDD) supporting two
media types:
2HD (double-side, high-density, double-track)
2DD (double-side, double-density, double-track)
The 2HD and 2DD floppy disks can be formatted with 1.44 Mbytes
and 720 Kbytes of storage capacity respectively.
lenge 8-bit slot) and one Toshiba

Advertisement

loading

Summary of Contents for Toshiba T5200

  • Page 1 The CPU is the 80386-20 32-bit microprocessor, operated at 20 MHz with 32 Kbytes high speed cache memory. The hard disk drive (HDD) has a capacity of 100 Mbytes (T5200/100 model) or 40 Mbytes (T5200 model) The floppy disk drive (FDD) can support 2DD (720 Kbytes) and 2HD (1.44 Mbytes) floppy disks.
  • Page 2 16-bit full-size industry-standard slot 16-bit Toshiba standard slot One 8-bit half-size industry-standard slot or one 16-bit Toshiba standard slot is used exclusively. The various ports are provided at rear of the system unit, such as 25-pin bidirectional parallel/external FDD connector, two 9-pin serial interface (I/F) connectors, and 15-pin VGA I/F connector.
  • Page 3 System board is composed of the following components: Central processing unit: CPU (80386-20) The CPU is a 32-bit microprocessor operated at 20 MHz clock speed. Numeric data processor socket for the 80387-20 (optional). Real time clock: RTC (MC146818A) The RTC continuously keeps the date and time powered by lithium battery.
  • Page 4 HRGS BIOS ROM: 32 Kbytes DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:1 HARDWARE OVERVIEW SECT:1.3, SYSTEM BOARD JUMPER STRAPS DOC_ID:1.3 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52001_7.TIF>Page 1-7</fig> 1.3 SYSTEM BOARD JUMPER STRAPS The system board has two jumper strap (PJ 16, 17) located on the system board as shown in figure 1-4, and a status is listed in table 1-1.
  • Page 5 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:1 HARDWARE OVERVIEW SECT:1.5, 3.5-INCH HARD DISK DRIVE DOC_ID:1.5 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52001_9.TIF>Page 1-9</fig> 1.5 3.5-INCH HARD DISK DRIVE The 100-Mbyte and 40-Mbyte hard disk drive (HDD) is a random access type storage device. It equipped with non-removal 3.5-inch magnetic disk and mini- winchester type magnetic heads.
  • Page 6 <fig id=MMS\5200\52001_9.TIF>Figure 1-6</fig> 3.5-inch HDD <fig id=MMS\5200\52001_10.TIF>Page 1-10</fig> Table 1-3 3.5-inch HDD specifications ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Item ³ Specifications ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ 100-Mbyte ³40-Mbyte ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³Storage Capacity (Mbytes) ³ ³ ³ ³ Formatted ³ 104 ³ 42.6 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´...
  • Page 7 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:1 HARDWARE OVERVIEW SECT:1.6, HDD JUMPER STRAPS DOC_ID:1.6 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52001_11.TIF>Page 1-11</fig> 1.6 HDD JUMPER STRAPS The HDD has four jumper straps located on the hard disk control board as shown in figure 1-7, and their status is listed in table 1-4.
  • Page 8 MODEL:T5200 MODEL:T5200C CHAP:1 HARDWARE OVERVIEW SECT:1.7, KEYBOARD DOC_ID:1.7 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52001_12.TIF>Page 1-12</fig> 1.7 KEYBOARD The 91/92-key keyboard with full size keys and standard spacing provides full compatibility with standard IBM software. The keyboard is connected to the keyboard controller on the system board through a 27-pin flat cable.
  • Page 9 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:1 HARDWARE OVERVIEW SECT:1.9, POWER SUPPLY UNIT DOC_ID:1.9 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52001_14.TIF>Page 1-14</fig> 1.9 POWER SUPPLY UNIT The universal auto-sensing power supply can be used worldwide and supplies +5, -5, +12, -12 and +24 VDC to the system.
  • Page 10 <fig id=MMS\5200\52001_16.TIF>Page 1-16</fig> File No. : 960-011 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.1, GENERAL DOC_ID:2.1 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52002_1.TIF>Page 2-1</fig> 2.1 GENERAL The problem isolation procedures described in part 2 are used to isolate defective FRUs (field replaceable units).
  • Page 11 2DD and 2HD formatted work disk (for FDD testing) Cleaning disk kit (for FDD testing) Multimeter Printer port LED The problem isolation flowchart described in section 2.2 can be used to determine which isolation procedures are necessary to isolate a T5200 problem. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.2, PROBLEM ISOLATION FLOWCHART...
  • Page 12 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.3, POWER SUPPLY UNIT PROBLEM ISOLATION PROCEDURES DOC_ID:2.3 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52002_4.TIF>Page 2-4</fig> 2.3 POWER SUPPLY UNIT PROBLEM ISOLATION PROCEDURES ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³WARNING: Dangerous high voltage is supplied to the power supply ³...
  • Page 13 Remove the power supply unit. (Refer to section 4.9.) If the power supply connector (PJ6 and PJ10) on the system board is connected properly, go to PROCEDURE 3. If it is not connected properly, reconnect it. <fig id=MMS\5200\52002_7.TIF>Page 2-7</fig> PROCEDURE 3 Output Voltage Check Plug the AC power cord to the power supply unit, then turn on the power.
  • Page 14 The defective unit must be isolated and replaced. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.4, SYSTEM, MEMORY, AND I/O BOARDS PROBLEM ISOLATION PROCEDURES DOC_ID:2.4 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52002_9.TIF>Page 2-9</fig> 2.4 SYSTEM, MEMORY, AND I/O BOARDS PROBLEM ISOLATION PROCEDURES ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»...
  • Page 15 Check system. Then, press [F1] key ..Error in CMOS. Bad configuration ** Check system. Then, press [F1] key ..*** Error in CMOS. Bad memory size *** Check system. Then, press [F1] key ..*** Error in CMOS. Bad time function ** Check system.
  • Page 16 Error protect mode... Error sizing expansion memory Memory verify error at X:X:X found X expected X Memory verify error at X:X:X found X expected X Error processor exceptional interrupts... Refresh timing error Error encountered initializing hard drive First 64KB memory error LIM page register error If none of the above messages are displayed and you have a printer port LED, go to PROCEDURE 2.
  • Page 17 Table 2-2 Printer port LED normal status (continued) ÚÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Status³Message ³ ÃÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 11H ³DMA channel 1 test ³ ³ 12H ³DMA page register test ³ ³ 13H ³Memory refresh test ³ ³ 14H ³First 64KB memory test ³ ³ 15H ³Interrupt vector set ³...
  • Page 18 ³ 91H ³DMA channel 1 error ³halt ³ ³ 92H ³DMA page register error ³halt ³ ³ 93H ³Memory refresh error ³halt ³ ³ 94H ³1st 64KB memory error ³halt ³ ³ 96H ³Error interrupt controller 1 ³halt ³ ³ 97H ³Error interrupt controller 2 ³Continue³...
  • Page 19 I/O board is probably defective. If normal operation is not restored, the system board is probably defective. Go to PROCEDURE 4. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.5, FLOPPY DISK DRIVE PROBLEM ISOLATION PROCEDURES DOC_ID:2.5 T5200 LANG:ALL...
  • Page 20 TEXT: <fig id=MMS\5200\52002_19.TIF>Page 2-19</fig> 2.5 FLOPPY DISK DRIVE PROBLEM ISOLATION PROCEDURES This section describes how to determine whether or not the floppy disk drive is defective. Start with PROCEDURE 1 and continue with other procedures as instructed. The procedures described in this section are: PROCEDURE 1: Test and Diagnostics Program Loading Check PROCEDURE 2:...
  • Page 21 to PROCEDURE 5. If message (b) or (c) is displayed, the contents of the floppy disk is damaged, or a disk other than the MS-DOS system disk has been inserted into the FDD. Insert a new MS-DOS system disk into the FDD.
  • Page 22 Reassemble the system. If normal operation is not restored, the system board is probably defective. Refer to section 2.4. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.6, HARD DISK DRIVE PROBLEM ISOLATION PROCEDURES DOC_ID:2.6 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52002_26.TIF>Page 2-26</fig>...
  • Page 23 2.6 HARD DISK DRIVE PROBLEM ISOLATION PROCEDURES This section describes how to determine whether or not the hard disk drive is defective. Start with PROCEDURE 1 and continue with other procedures as instructed. The procedures described in this section are: PROCEDURE 1: HDD Indicator Check PROCEDURE 2:...
  • Page 24 Format Execution ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º CAUTION: The contents of the hard disk will be erased when the º º FORMAT command is run. Before running this test, transfer the º º contents of the hard disk to floppy disks. This can be done withº...
  • Page 25 ³ ³ Bad track error ³ ³ ³ ECC error ³ ³ ³ ECC recover enable ³ ³ ³ HDC error ³ ³ ³ Seek error ³ ³ ³ Time out error ³ ³ ³ Drive not ready ³ ³ ³...
  • Page 26 Refer to section 2.4. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.7, KEYBOARD PROBLEM ISOLATION PROCEDURES DOC_ID:2.7 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52002_34.TIF>Page 2-34</fig> 2.7 KEYBOARD PROBLEM ISOLATION PROCEDURES This section describes how to determine whether or not the keyboard is defective.
  • Page 27 If the character you press appears on the screen, press Enter key. Go to PROCEDURE 2. If the character does not appear on the screen, go to PROCEDURE 3. Toshiba Personal Computer MS-DOS Version X.XX /(RXXXXX) Copyright Toshiba Corporation 1983,1986...
  • Page 28 Refer to section 2.4. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:2 PROBLEM ISOLATION PROCEDURES SECT:2.8, PLASMA DISPLAY PROBLEM ISOLATION PROCEDURES DOC_ID:2.8 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52002_39.TIF>Page 2-39</fig> 2.8 PLASMA DISPLAY PROBLEM ISOLATION PROCEDURES This section describes how to determine whether or not the plasma display is defective.
  • Page 29 hold the Ctrl key, then press the Home key. After performing (a) and (b), reperform steps 1 and 2. If the message in step 2 still fails to appear, go to PROCEDURE 3. <fig id=MMS\5200\52002_41.TIF>Page 2-41</fig> PROCEDURE 2 Display Test Execution Insert the diagnostics disk into the FDD.
  • Page 30 3.1 GENERAL This section explains test and diagnostics programs. That checks the functions of all hardware modules of the T5200. There are 19 programs grouped into two modules: the service program module (DIAGNOSTICS MENU) and test program module (DIAGNOSTIC TEST MENU).
  • Page 31 Type in a:testce52, then press Enter. The following display will appear: TOSHIBA personal computer T5200 DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 1988 DIAGNOSTICS MENU: 1 - DIAGNOSTIC TEST 2 - HARD DISK FORMAT 3 - SEEK TO LANDING ZONE (HDD)
  • Page 32 5 - FLOPPY DISK TEST 6 - PRINTER TEST 7 - ASYNC TEST 8 - HARD DISK TEST 9 - REAL TIMER TEST 10 - NDP TEST 11 - EXPANSION TEST 88 - FDD & HDD ERROR RETRY COUNT SET 99 - EXIT TO DIAGNOSTICS MENU PRESS [1] - [9] KEY Numbers, 1 to 11 are diagnostic tests.
  • Page 33 The error code and error status names are described in section 3.15. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.3, SUBTEST NAMES DOC_ID:3.3 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_5.TIF>Page 3-5</fig> 3.3 SUBTEST NAMES Table 3-1 lists the subtest of each test program.
  • Page 34 ³ ³ ³ ³ Protected mode ³ ³ ³ ³ ³ ³ Memory module ³ ³ ³ ³ ³ ³ LIM/EMS ³ ³ ³ ³ ³ ³ (Expanded memory) ³ ³ ³ ³ ³ ³ Cache memory ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³...
  • Page 35 ³ 32-bus ³ ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.4, SYSTEM TEST DOC_ID:3.4 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_7.TIF>Page 3-7</fig> 3.4 SYSTEM TEST Subtest 01 ROM checksum This test performs the ROM checksum test on the system board.
  • Page 36 ³ ³ ÀÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.5, MEMORY TEST DOC_ID:3.5 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_8.TIF>Page 3-8</fig> 3.5 MEMORY TEST Subtest 01 RAM constant data (in real mode) This subtest writes constant data to memory, then reads and compares it with the original data.
  • Page 37 After selecting the subtest, the following message will appear. 3 second test count: Cache on = XXXXX Cache off = XXXXX DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.6, KEYBOARD TEST DOC_ID:3.6 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_10.TIF>Page 3-10</fig>...
  • Page 38 Keytop = XXXX Ins Lock Caps Lock Num Lock Scroll Lock Ctrl Left Shift Right Shift PRESS [ENTER] KEY DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.7, DISPLAY TEST DOC_ID:3.7 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_11.TIF>Page 3-11</fig> 3.7 DISPLAY TEST...
  • Page 39 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³NOTE: The contents of the this test differ with the display mode ³ ³(VGA-color, VGA-monochrome, CGA). This mode is changed with the SETUP³ ³program. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Subtest 01 VRAM read/write This subtest writes constant data (FFFFH, AAAAH, 5555H, 0000H) and address data to video RAM (256 Kbytes), then reads the data written and compares it with the original data.
  • Page 40 Next, this subtest displays sixteen colors in mode 13H as shown above. Subtest 03 Character set In this subtest the character set of its code (00H to FFH) is displayed in the 40 x 25 character mode as shown below. <fig id=MMS\5200\52003_13.TIF>Figure</fig>...
  • Page 41 <fig id=MMS\5200\52003_16.TIF>Page 3-16</fig> Subtest 08 Display page This subtest confirms that the pages can be changed in order (page 0 to page 7) in the 40*25 character mode. DISPLAY PAGE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Subtest 09 "H"...
  • Page 42 (2AH/15H) to DAC registers. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.8, FLOPPY DISK TEST DOC_ID:3.8 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_17.TIF>Page 3-17</fig> 3.8 FLOPPY DISK TEST ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºCAUTION: Before running the floppy disk test, prepare a formatted workº...
  • Page 43 Media in drive#1 mode (0:2DD,1:2D,2:2D-2HD/2DD,3:2HD) ? Select the media type of the floppy disk to be tested, then press the Enter. The following message will appear. Test start track (Enter:0/dd:00-79) ? <fig id=MMS\5200\52003_18.TIF>Page 3-18</fig> You can select the start track number of the floppy disk test. When pressing the Enter only, the start track number will be zero.
  • Page 44 You can specify the track number and head number. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.9, PRINTER TEST DOC_ID:3.9 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_19.TIF>Page 3-19</fig> 3.9 PRINTER TEST ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºCAUTION: A printer (IBM compatible) must be connected to the system inº...
  • Page 45 01, 02 or 03, the following message will appear. Select the channel number (1-3) ? Select the printer channel number, then type in the number. The T5200 supports three printer channels. After pressing the Enter, the subtest is executed. DOC:MAINTENANCE MANUAL...
  • Page 46 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ NOTE: The RS-232-C direct cable (9-pin to 9-pin must be connected³ ³ to channel 1 and 2 to execute this test. The wiring diagram of ³ ³ the RS-232-C direct cable is described in section 3.25. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ The same test as the subtest 01 is performed for the channel #1 <=>...
  • Page 47 5 in this order, then checks if this function works correctly. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.11, HARD DISK TEST DOC_ID:3.11 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_23.TIF>Page 3-23</fig> 3.11 HARD DISK TEST ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºCAUTION: The contents of the hard disk will be erased when subtestº...
  • Page 48 press the Enter. The following message will appear. Data compare error dump (1:no, 2:yes) ? This message is used to select whether to do dump operation or not when data compare error is detected. Select yes or no and press the Enter.
  • Page 49 Subtest 10 W-R-C specified address This subtest writes specified data to the specified cylinder and head, then read and compare with original data. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.12, REAL TIMER TEST DOC_ID:3.12 T5200...
  • Page 50 ³ CAUTION: When this test is executed, the current date and time ³ ³ is erased. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ This subtest checks whether the real time clock increments the time displayed correctly (month, day, year, hour, minute, second). DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.13, NDP TEST DOC_ID:3.13 T5200 LANG:ALL...
  • Page 51 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.14, EXPANSION UNIT TEST DOC_ID:3.14 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_27.TIF>Page 3-27</fig> 3.14 EXPANSION UNIT TEST ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ NOTE: If there is no expansion unit connected to the system, this³...
  • Page 52 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.15, ERROR CODE AND ERROR STATUS NAMES DOC_ID:3.15 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_28.TIF>Page 3-28</fig> 3.15 ERROR CODE AND ERROR STATUS NAMES Table 3-3 lists the error code and error status names.
  • Page 53 ³ ³ ³ Bus Error ³ ³ ³ ³ Addition Error ³ ³ ³ ³ Multiply Error ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.16, HARD DISK TEST DETAIL STATUS DOC_ID:3.16 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_30.TIF>Page 3-30</fig>...
  • Page 54 3.16 HARD DISK TEST DETAIL STATUS When an error occurs on the hard disk test, the following message will appear. HDC status = XXXXXXXX Detailed status of the hard disk test error is shown on the screen by eight-unit number. The first XXXX is error status and the last XXXX is not used.
  • Page 55 ³Not used. ³ ÀÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.17, HARD DISK FORMAT DOC_ID:3.17 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_31.TIF>Page 3-31</fig> 3.17 HARD DISK FORMAT There are two types of hard disk formatting: 1. Physical formatting 2. Logical formatting This program is for physical formatting of the hard disk;...
  • Page 56 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ CAUTION: The contents of the hard disk will be erased when this ³ ³ program is run. Before running the program, transfer the contents³ ³ of the hard disk on to a floppy disk. This can be done with the ³...
  • Page 57 3 - Bad track FORMAT 4 - Bad track CHECK 9 - Exit to DIAGNOSTICS MENU Press [NUMBER) key ? All track FORMAT Selection When all track FORMAT (1) is selected, the following message will appear. Drive number select (1:#1, 2:#2) ? Select a drive number.
  • Page 58 After checking the bad tracks of the hard disk, the Format complete message will appear. Press the Enter to return to the HARD DISK FORMAT menu. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.18, SEEK TO LANDING ZONE (HDD) DOC_ID:3.18 T5200 LANG:ALL...
  • Page 59 After pressing Enter, the DIAGNOSTIC MENU appears. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.19, HEAD CLEANING DOC_ID:3.19 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_36.TIF>Page 3-36</fig> 3.19 HEAD CLEANING 3.19.1 Program description This program executes head loading and seek/read operations for head cleaning.
  • Page 60 When cleaning is finished, the display automatically returns to the DIAGNOSTICS MENU. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.20, LOG UTILITIES DOC_ID:3.20 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_36.TIF>Page 3-36</fig> 3.20 LOG UTILITIES 3.20.1 Program description The error information is stored in the RAM, while a test is in progress.
  • Page 61 The 7 key writes log information to a floppy disk. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.21, RUNNING TEST DOC_ID:3.21 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_38.TIF>Page 3-38</fig> 3.21 RUNNING TEST 3.21.1 Program description This program automatically runs the following tests in sequence.
  • Page 62 This program is repeated continuously. To stop the program, press Ctrl + Break. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.22, FDD UTILITIES DOC_ID:3.22 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_39.TIF>Page 3-39</fig> 3.22 FDD UTILITIES 3.22.1 Program description These programs format and copy floppy disks, and display dump list for both the FDD and the HDD.
  • Page 63 (3) 2HD:Double-sided, high-density, double-track, 96/135 TPI, MFM mode, 512 bytes, 18 sectors/track. 2. COPY This program copies from source floppy disk to target floppy disk. DUMP This program displays the contents of floppy disks (both 3.5" and 5.25") and hard disk (designated sectors). 3.22.2 Operations After pressing 7 and Enter key in the DIAGNOSTICS MENU, the following display will appear before program execution.
  • Page 64 After the floppy disk is formatted, the following message will appear. Format complete Another format (1:Yes/2:No) ? If you type 1 and press Enter key, the display will return to the message in (3) above. If you type 2 the display will return to the DIAGNOSTICS MENU. <fig id=MMS\5200\52003_41.TIF>Page 3-41</fig>...
  • Page 65 If you type 1 the display will return to the message shown after (1) above. If you type 2 the display will return to the DIAGNOSTICS MENU. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.23, SYSTEM CONFIGURATION DOC_ID:3.23 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_43.TIF>Page 3-43</fig> 3.23 SYSTEM CONFIGURATION 3.23.1 Program description...
  • Page 66 Press Enter key to return to the DIAGNOSTICS MENU. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:3 TESTS AND DIAGNOSTICS SECT:3.24, SETUP DOC_ID:3.24 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52003_44.TIF>Page 3-44</fig> 3.24 SETUP 3.24.1 Accessing the SETUP Press: 0 followed by Enter, and the following screen appears:...
  • Page 67 The program calculates how much conventional, extended and expanded memory your T5200 has, based on whether or not you have memory expansion kits installed. Setup stores the value it calculates in configuration memory along with the factory preset values for the other options.
  • Page 68 Follow the steps to change any option(s) manually: Notice the cursor (reverse display highlight bar). This cursor indicates which option is selected for change. Use the up and down arrow keys (or Enter) to move the cursor between options. When the cursor highlights the value of an option you want to change, use the left and right arrow keys to select alternate values.
  • Page 69 You specify 1MB of extended memory. The system automatically allocates 2MB as expanded memory. Specify how you want to use the T5200's remaining memory, usually 384KB. Set this value through the Expanded memory value of the Memory size option. You have these choices:...
  • Page 70 Beginning with the base system on the left, find the amount of extended memory you wish to use in the second column. The third and fourth columns show you how much expanded memory your T5200 will have with and without the memory expansion kit.
  • Page 71 Plasma Display mode: If there isn't a CRT attached to the T5200, this option selects whether the plasma display uses monochrome mode or color mode. If there is a CRT attached to the T5200, the display mode of the plasma display is determined by the type of the CRT (either monochrome or color), and the setting for this option has no effect.
  • Page 72 4. Printer Port Type This option sets the PRT/FDD connector on the rear panel of the T5200 to either an output-only or a bi-directional port. This option is valid only when the PRT/FDD connector is used for the printer, that is , the A B PRT switch is set to PRT.
  • Page 73 The standard T5200 supports two serial ports and one expansion serial port.Since the I/O address of a serial port is automatically established according to its interrupt level, the SETUP program prompts you to specify only the interrupt level.
  • Page 74 -High: High selects the maximum CPU speed and the maximum bus speed. -Normal: Normal selects the maximum CPU speed and the low bus speed. This setting makes the T5200 bus compatible with the IBM PC AT bus. -Low: Low selects the low CPU speed and the low bus speed. This setting makes the T5200 bus and CPU speed compatible with the IBM PC AT.
  • Page 75 <fig id=MMS\5200\52003_54.TIF>Page 3-54</fig> 3.25 WIRING DIAGRAM Printer wraparound connector (Pin No.) Signal Name Signal Name (Pin No.) (9) +PD7 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -ERROR (15) (8) +PD6 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -AUTFD (14) (7) +PD5 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ +SELECT (13) (6) +PD4 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -PINIT (16) (5) +PD3 ÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄ -STROBE ³...
  • Page 76 <fig id=MMS\5200\52003_56.TIF>Page 3-56</fig> File No.: 960-011 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.1, GENERAL DOC_ID:4.1 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_1.TIF>Page 4-1</fig> 4.1 GENERAL This section gives a detailed description of the procedures for removing and replacing FRUs (field replaceable units).
  • Page 77 1. Phillips head screwdriver DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.2, REMOVING/REPLACING THE KEYBOARD AND THE SPEAKER DOC_ID:4.2 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_2.TIF>Page 4-2</fig> 4.2 REMOVING/REPLACING THE KEYBOARD AND THE SPEAKER Remove the AC power cord from the unit.
  • Page 78 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.3, REMOVING/REPLACING THE TOP COVER DOC_ID:4.3 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_5.TIF>Page 4-5</fig> 4.3 REMOVING/REPLACING THE TOP COVER Remove the AC power cord from the unit. Turn the unit upside down and remove the six screws (A) from the bottom cover.
  • Page 79 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.4, REMOVING/REPLACING THE FAN, THE LED BOARD AND THE BATTERY DOC_ID:4.4 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_9.TIF>Page 4-9</fig> 4.4 REMOVING/REPLACING THE FAN, THE LED BOARD AND THE BATTERY Remove the top cover as directed in section 4.3.
  • Page 80 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.5, REMOVING/REPLACING THE DISK SUPPORT DOC_ID:4.5 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_11.TIF>Page 4-11</fig> 4.5 REMOVING/REPLACING THE DISK SUPPORT Remove the top cover as directed in section 4.3 to disconnect the three connectors PJ601, PJ701, PJ702 (A) from the LED boards (B).
  • Page 81 To install the HDD, follow the above procedures in reverse. DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.7, REMOVING/REPLACING THE FDD DOC_ID:4.7 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_13.TIF>Page 4-13</fig> 4.7 REMOVING/REPLACING THE FDD Remove the disk support as directed in section 4.5.
  • Page 82 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.9, REMOVING/REPLACING THE POWER SUPPLY DOC_ID:4.9 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_15.TIF>Page 4-15</fig> 4.9 REMOVING/REPLACING THE POWER SUPPLY Remove the disk support as directed in section 4.5 and remove the five screws (A) from the power supply (B).
  • Page 83 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.11, REMOVING/REPLACING THE MEMORY BOARD DOC_ID:4.11 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_17.TIF>Page 4-17</fig> 4.11 REMOVING/REPLACING THE MEMORY BOARD Remove the keyboard as directed in section 4.2 then remove the three screws (A) from the memory board (B).
  • Page 84 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.13, REMOVING/REPLACING THE SYSTEM BOARD DOC_ID:4.13 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_19.TIF>Page 4-19</fig> 4.13 REMOVING/REPLACING THE SYSTEM BOARD Remove the expansion connector board as directed in section 4.12. Remove the eight screws (A) from the system board and disconnect the speaker connector PJ4 (B), then remove the system board.
  • Page 85 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:4 REPLACEMENT PROCEDURES SECT:4.15, REMOVING/REPLACING THE CONVERTER BOARD, THE VOLUME BOARD AND DOC_ID:4.15 T5200 LANG:ALL TEXT: <fig id=MMS\5200\52004_21.TIF>Page 4-21</fig> 4.15 REMOVING/REPLACING THE CONVERTER BOARD, THE VOLUME BOARD AND THE LATCH ASSEMBLY Remove the PDP unit as directed in section 4.14 in order to remove the four screws (A) from hinge assembly (B).
  • Page 86 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX A BOARD LAYOUT SECT: DOC_ID:A T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200A_1.TIF>Page A-1</fig> APPENDIX A BOARD LAYOUT 1. SYSTEM BOARD (ICs) <fig id=MMS\5200\5200A_1.TIF>Figure A-1</fig> System board (ICs) <fig id=MMS\5200\5200A_2.TIF>Page A-2</fig> (1) CPU: Control processing unit (80386-20) (2) NDP Socket: Numeric data processing socket (80387-20)
  • Page 87 <fig id=MMS\5200\5200A_8.TIF>Figure A-6</fig> Back panel board (1) PJ1: System board I/F connector (2) PJ2: 8-bit I/F connector (3) PJ3: 16-bit I/F connector DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.1 SYSTEM BOARD SECTION 1 of 2 DOC_ID:B T5200 LANG:ALL TEXT:...
  • Page 88 <fig id=MMS\5200\5200B_1.TIF>Page B-1</fig> APPENDIX B PIN ASSIGNMENT 1. SYSTEM BOARD SECTION 1 of 2 1.1 PJ1 Keyboard connector (27-pin) Table B-1 Keyboard connector pin assignment ÚÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄ¿ ³ Pin ³ Signal ³ ³ Pin ³ Signal ³ I/O ³ ÃÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄ´ ³ ³...
  • Page 89 ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄ´ ³15 ³ MD11:100 ³ ³ 16 ³ MD12:100 ³ I/O ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄ´ ³17 ³ MD13:100 ³ ³ 18 ³ MD14:100 ³ I/O ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄ´ ³19 ³ MD15:100 ³ ³ 20 ³ ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄ´ ³21 ³ MD16:100 ³ ³ 22 ³...
  • Page 90 ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄ´ ³ 67 ³ ³ ³ 68 ³ ³ ³ ÀÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÙ 1.3 PJ3 Lithium battery connector (3-pin) Table 3-3 Lithium battery connector pin assignment ÚÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄ¿ ³ Pin ³ Signal ³ ³ Pin ³ Signal ³ I/O ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄ´ ³ 1 ³...
  • Page 91 ³ P12V:100 ³ ³ 3 ³ DRVBLD:000 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 2 ³ DRVALD:100 ³ ³ 4 ³ ³ ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.1 SYSTEM BOARD SECTION 2 of 2 DOC_ID:B T5200 LANG:ALL TEXT:...
  • Page 92 <fig id=MMS\5200\5200B_4.TIF>Page B-4</fig> APPENDIX B PIN ASSIGNMENT 1. SYSTEM BOARD SECTION 2 of 2 PJ9 HDC I/F connector (40-pin) Table B-9 HDC I/F connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄ¿ ³Pin ³ Signal ³ I/O ³ Pin³ Signal ³I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 1 ³...
  • Page 93 ³ 1 ³ M12V:000 ³ ³ ³ GND ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 2 ³ M5V:000 ³ ³ ³ PDP:000 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 3 ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÙ <fig id=MMS\5200\5200B_5.TIF>Page B-5</fig> 1.11 PJ11 Expansion bus connector (60-pin) Table B-11 Expansion bus connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄ¿...
  • Page 94 ³45 ³ IOR:000 ³I/O ³ 46 ³ TC:100 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³47 ³ BALE:100 ³O ³ 48 ³ RESET:100 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³49 ³ DACK1:000 ³ ³ 50 ³ IRQ9:100 ³ I ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³51 ³ ³ ³ 52 ³ ³...
  • Page 95 ³18 ³ LA21:100 ³ ³ 38³ MEMW:000 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³19 ³ LA19:100 ³ ³ 39³ IRQ7:000 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³20 ³ LA20:100 ³ ³ 40³ GND ³ ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ 1.13 PJ13 FDD connector (26-pin) Table B-13 FDD connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿...
  • Page 96 ³11 ³SD4:100 ³ I/O ³ 12 ³SD5:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³13 ³TC:100 ³ O ³ 14 ³BALE:100 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³15 ³SD2:100 ³ I/O ³ 16 ³SD3:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³17 ³1PQ3:100 ³ I ³ 18 ³DACK2:000 ³...
  • Page 97 ³71 ³MEMW:000 ³ I/O ³ 72 ³SD8:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³73 ³DACK6:000 ³ O ³ 74 ³DRQ6:100 ³ I ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³75 ³LA17:100 ³ I/O ³ 76 ³MEMR:000 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³77 ³DACK5:000 ³ O ³ 78 ³DRQ5:100 ³...
  • Page 98 ³15 ³ TRAKC0:000³ O ³ 16 ³ WPPOTC:000 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³17 ³ RDDA:000 ³ O ³ 18 ³ FSELSW:000 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³19 ³ HSD7:000 ³ I ³ 20 ³ CK16M:100 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³21 ³ SAO:110 ³...
  • Page 99 ³75 ³ IRQ6:100 ³ I ³ 76 ³ IRQ7:100 ³ I ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³77 ³ DACK2:000 ³ O ³ 78 ³ TC:100 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³79 ³ DMACK:100 ³ O ³ 80 ³ REFRSH:000 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³81 ³...
  • Page 100 ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.2 MEMORY BOARD DOC_ID:B T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200B_10.TIF>Page B-10</fig> APPENDIX B PIN ASSIGNMENT 2. MEMORY BOARD 2.1 PJ1 System board I/F connector (68-pin) Table B-17 System board I/F connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄ¿...
  • Page 101 ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 33 ³ MD27:100 ³ I/O ³34 ³ MD28:10 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 35 ³ MD29:100 ³ I/O ³36 ³ MD30:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 37 ³ MD31:100 ³ I/O ³38 ³ VCC ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 39 ³ ³...
  • Page 102 ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 8 ³ ³ ³28 ³MD26:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 9 ³ MD20:100 ³ I/O ³29 ³MD27:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³10 ³ MD21:100 ³ I/O ³30 ³ GND ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³11 ³ MD22:100 ³ I/O ³31 ³MA6:020 ³...
  • Page 103 ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³14 ³ MA3:021 ³ O ³34 ³ MA9:021 ³ O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³15 ³ ³ ³35 ³ ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³16 ³ CAS0:020 ³ O ³36 ³ MD12:100 ³ I/O ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³17 ³ RAS2:010 ³ O ³37 ³ MD13:100 ³...
  • Page 104 ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 19 ³ WE:020 ³ O ³39 ³ MD31:100 ³ I/O ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄ´ ³ 20 ³ RAS5:010 ³ O ³40 ³ ³ ³ ÀÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÙ 2.5 IS16B Memory module connector 2B (40-pin) Table B-21 Memory module connector 2B pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄ¿...
  • Page 105 ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Pin ³ Signal ³ ³ Pin ³ Signal ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 1 ³ ³ ³ 21 ³ CAS3:020 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 2 ³ MD16:100 ³ ³ 22 ³ MPD2:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 3 ³ MD17:100 ³ ³...
  • Page 106 ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 6 ³ MA0:021 ³ ³ 26 ³ MD8:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 7 ³ MA0:021 ³ ³ 27 ³ MD9:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 8 ³ ³ ³ 28 ³ MD10:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 9 ³ MD4:100 ³...
  • Page 107 ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.3 I/O BOARD DOC_ID:B T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200B_15.TIF>Page B-15</fig> APPENDIX B PIN ASSIGNMENT 3. I/O BOARD 3.1 PJ-1 System board I/F connector (120-pin) Table B-25 System board I/F connector pin assignment ÚÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿...
  • Page 108 ³ 25 ³ SA4:110 ³ ³ ³ SA5:110 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄij ³ 27 ³ SA6:110 ³ ³ ³ SA7:110 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 29 ³ SA8:110 ³ ³ ³ SA9:110 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 31 ³ ³ ³ ³ SA10:110 ³...
  • Page 109 ³ 85 ³ DRQ2:100 ³ ³ ³ GND ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 87 ³ SYSCLK;100 ³ ³ ³ N/C ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 89 ³ COVER:100 ³ ³ ³ IRQ9:100 ³ ³ ÀÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ <fig id=MMS\5200\5200B_16.TIF>Page B-16</fig> Table B-25 System board I/F connector pin assignment (continued) ÚÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄ¿...
  • Page 110 ³ ³ SA3:110 ³ ³ 8 ³ SA4:110 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ SA5:110 ³ ³ 10 ³ ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 11 ³ ³ ³ 12 ³ SA6:110 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 13 ³ SA7:110 ³ ³ 14 ³ SA8:100 ³...
  • Page 111 ³ 67 ³ IORDY:000 ³ ³ 68 ³ DMACK:100 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 69 ³ REFRSH:000 ³ ³ 70 ³ ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 71 ³ ³ ³ 72 ³ IOW:010 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 73 ³ IOR:010 ³ ³ 74 ³...
  • Page 112 ³ 5 ³ PD3;120 ³ ³ RDDA;000 ³ ³ ÃÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 6 ³ PD4;120 ³ ³ DSKCHG;000 ³ ³ ÃÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 7 ³ PD5;120 ³ ³ ³ ³ ÃÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 8 ³ PD6;120 ³ ³ ³ ³ ÃÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 9 ³ PD7;120 ³...
  • Page 113 ³ ÀÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.4 HRGS BOARD DOC_ID:B T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200B_20.TIF>Page B-20</fig> APPENDIX B PIN ASSIGNMENT HRGS BOARD 4.1 PJ1 VGA display I/F connector (15-pin) Table B-30 VGA display I/F connector pin assignment ÚÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿...
  • Page 114 ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ SA3:100 ³ ³ ³ SA4:100 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ SA5:100 ³ ³ ³ ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 11 ³ ³ ³ ³ SA6:100 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 13 ³ SA7:100 ³ ³ ³ SA8:100 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´...
  • Page 115 98 ³KANJ1:000 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 99 ³ PVCK0:100 ³ ³ 100 ³ VCC ³ ³ ÀÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.5 BACKPANEL BOARD DOC_ID:B T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200B_22.TIF>Page B-22</fig> APPENDIX B PIN ASSIGNMENT BACKPANEL BOARD...
  • Page 116 5.1 PJ1 System board I/F connector (100-pin) Table B-32 System board I/F connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Pin ³ Signal ³ ³ Pin ³ Signal ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 1 ³ SA1:100 ³ ³ 2 ³ SA0:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 3 ³...
  • Page 117 ³ 53 ³ RESET:100 ³ ³ 54 ³ IRQ9:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 55 ³ SA8:100 ³ ³ 56 ³ ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 57 ³ SD14:100 ³ ³ 58 ³ SD15:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 59 ³ SA6:100 ³ ³...
  • Page 118 ÚÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Pin ³ Signal ³ ³ Pin ³ Signal ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ IOCHK:000 ³ ³ 17 ³ SA14:100 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ SD7:100 ³ ³ 18 ³ SA13:100 ³ ³ ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ SD6:100 ³ ³ 19 ³ SA12:100 ³...
  • Page 119 ³ 9 ³ P12V ³ ³ 25 ³ IRQ3:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 10 ³ ³ ³ 26 ³ DACK2:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 11 ³ SMEMW:000 ³ ³ 27 ³ TC:100 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 12 ³ SA19:100 ³ ³...
  • Page 120 ³ 35 ³ SBHE:000 ³ ³ 36 ³ MEM16:000 ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 37 ³ ³ ³ 38 ³ ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 39 ³ ³ ³ 40 ³ ³ ³ ÃÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ 41 ³ ³ ³ 42 ³ ³ ³...
  • Page 121 ³ ³ ÀÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.6 SENSOR BOARD DOC_ID:B T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200B_26.TIF>Page B-26</fig> APPENDIX B PIN ASSIGNMENT SENSOR BOARD 6.1 PJ801 Sensor board connector (3-pin) Table B-36 Sensor board connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿...
  • Page 122 ³ ÀÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX B PIN ASSIGNMENT SECT:B.8 LED BOARD (LEFT) DOC_ID:B T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200B_26.TIF>Page B-26</fig> APPENDIX B PIN ASSIGNMENT LED BOARD (LEFT) 8.1 PJ701 LED board connector (4-pin) Table B-38 LED board connector pin assignment ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿...
  • Page 123 CHAP:APPENDIX C DISPLAY CODE SECT: DOC_ID:C T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200C_1.TIF>Page C-1</fig> APPENDIX C DISPLAY CODE <fig id=MMS\5200\5200C_1.TIF>Table C-1</fig> Display Code <fig id=MMS\5200\5200C_2.TIF>Page C-2</fig> File No : 960-011 DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX D KEYBOARD SCAN/CHARACTER CODE SECT: DOC_ID:D T5200...
  • Page 124 ³ 7 ³ 6 ³ " ³ " ³ " ³ " ³ " ³ " ³ ÃÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ & ³ 0837 ³ 0826 ³ 0837 ³ 0826 ³ ----³ 7E00 ³ ³ 8 ³ 7 ³ " ³ "...
  • Page 125 ³ ³ O ³ 186F ³ 184F ³ 184F ³ 186F ³ 180F ³ 1800 ³ ³24 ³ ³ " ³ " ³ " ³ " ³ " ³ " ³ ÃÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ P ³ 1970 ³ 1950 ³ 1950 ³ 1970 ³...
  • Page 126 ³ ³ Z ³ 2C7A ³ 2C5A ³ 2C5A ³ 2C7A ³ 2C1A ³ 2C00 ³ ³44 ³ ³ " ³ " ³ " ³ " ³ " ³ " ³ ÃÄÄÄÄÅÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ X ³ 2D78 ³ 2D58 ³ 2D58 ³ 2D78 ³...
  • Page 127 ÃÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ F3 ³ 3D00 ³ 5600 ³ 3D00 ³ 5600 ³6000 ³ 6A00 ³ ³61 ³ ³ " ³ " ³ " ³ " ³ " ³ " ³ ÃÄÄÄÄÅÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ F4 ³ 3E00 ³ 5700 ³ 3E00 ³...
  • Page 128 Left Shift Up Cursor S-R: Sys Req R-S: Right Shift PUP: PgUp PUS: Pursue L-A: Left Alt Right Cursor BRK: Break SPC: Space Down Cursor R-E: Right Enter CAP: Caps Lock PDN: PgDn DOC:MAINTENANCE MANUAL MODEL:T5200 MODEL:T5200C CHAP:APPENDIX E KEY LAYOUT...
  • Page 129 SECT: DOC_ID:E T5200 LANG:ALL TEXT: <fig id=MMS\5200\5200E_1.TIF>Page E-1</fig> APPENDIX E KEY LAYOUT USA VERSION <fig id=MMS\5200\5200E_1.TIF>Figure E-1</fig> USA version UK VERSION <fig id=MMS\5200\5200E_1.TIF>Figure E-2</fig> UK version <fig id=MMS\5200\5200E_2.TIF>Page E-2</fig> GERMANY VERSION <fig id=MMS\5200\5200E_2.TIF>Figure E-3</fig> Germany version FRANCE VERSION <fig id=MMS\5200\5200E_2.TIF>Figure E-4</fig> France version <fig id=MMS\5200\5200E_3.TIF>Page E-3</fig>...
  • Page 130 <fig id=MMS\5200\5200E_6.TIF>Figure E-11</fig> Norway version...

This manual is also suitable for:

T5200c