Table of Contents
Advertisement
Operation
AUTO operation, COOLING, HEATING and DEHUMIDIFICATION operation
1) Start up operation: press the button of ON/OFF, the system will start up, and will display on LCD.
2) Select MODE: press the MODE button, then you will see in the display section [MODE] switch over
in below sequence:[FAN ONLY]
[COOL].
3) Change set temperature: press TEMP + or ñ every time, [SET] will display, and set temperature will
increase/reduce 1 C( F).
4) Select fan speed: press FAN button, then you see in the display section [FAN] switch over in below
sequence: [HIGH]
[MED]
5) Select [SWING]: press [SWING] button, [SWING] will display, swing function is valid, press again,
[SWING] will disappear, swing function is invalid.
6) Set [HEALTH]: used to set the indoor health function. Press it once, [HEALTH] will display in the
display section, then indoor health function is valid. Press it again, [HEALTH] will disappear, then the
health function is invalid.
This function is valid only for the unit with health function.
7) Power off: press ON/OFF button,
indoor unit is powered off. There are
only time and the ambient temperature
in the screen.
[COOL]
[DRY]
[LOW]
[HIGH]. Select proper fan speed.
4
[HEAT]
[AUTO]
[FAN ONLY]. Select
C
2
4
5
3
6
1, 7
Hide quick links:
Advertisement
Table of Contents
