LG E1960S Owner's Manual page 10

Connecting the Display Monitor
Connecting the Monitor to a Computer
1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable
of the signal cable.
A
Connect DVI-D(Digital signal) Cable
B Connect D-sub(Analog signal) Cable
Connect HDMI Cable
C
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display computer and monitor may differ from the view shown.
Varies according to model.
AV equipment
(Set-Top Box, DVD,
Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
Wall-outlet Type
1 2
and power cord
When using a D-Sub signal input cable
connector for Macintosh
Mac Adapter : Apple Macintosh needs a
separate plug adaptor to change the 15-pin
supplied D-sub Cable (2 rows) to its 15-pin
High Density D-sub VGA connection(3
rows).
9
E2260V/E2360V
in order, then tighten the screw
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.
Headphone/Earphone Input
DVI-D (This feature is not
available in all countries.)