Hitachi C 10FCH2 Technical Data And Service Manual page 6

(5) Large table for increased material stability
The turn table is as large as that of the Model C 10FCH.
(6) Powerful 15 amps motor (for U.S.A. and Canada)
The Models C 10FCH2 and C 10FCE2 are equipped with a 15-ampere motor. The Models C 10FCH2 and
C 10FCE2 can cut workpieces as quickly as the Model C 10FCH.
(7) Thumb actuated positive stops for quick and easy miter adjustment
The positive stops are provided to adjust the turn table position for miter cutting in the same manner as the
current Model C 10FCH. These stops can be also actuated (fixed or released) with thumb quickly and easily
holding the side handle.
(8) Dust guide to prevent chips from scattering
A dust guide is provided to prevent wood chips from adhering to the saw blade and scattering when cutting the
edge of the workpiece.
C 10FCH2/C 10FCE2
C 10FCH/C 10FCE
Table 1
Outside diameter of turn table (mm)
280
280
--- 3 ---