I/O Card Installation - Yamaha AW4416 Service Manual

9. Re-attach the CD-RW drive cover and the connector cover that you removed in step 3. At this time, remove
the CD-RW plate from the CD-RW drive cover.
CD-RW drive cover

I/O CARD INSTALLATION

1. Make sure that the power of the AW4416 is turned off. For safety's sake, disconnect the power cable from the
AC outlet.
2. From the OPTION I/O slot located on the rear panel of the AW4416, remove the two screws (Bind head screw
4.0 X 2 VB132700) that hold the cover in place.
Connector cover
CD-RW plate
AW4416
41