Panasonic MX-151SG2 Operating Instructions Manual page 7

To disassemble Blender
拆解攪拌機
Turn blender container base
2
counterclockwise to disassemble.
將攪拌機刀座逆時針方向旋轉取下。
1
To assemble Blender
組裝攪拌機
Twist the blender container base
clockwise.
• Make sure that the gasket is
3
positioned properly, and check
that the blender container base
is tightened securely to prevent
2
leakage.
1
• After mounting the blender
container base on the motor
housing, do not remove the
blender container. Otherwise, the
motor will not run.
將攪拌機容器順時針方向旋轉裝上
• 正確裝好墊圈，以使容器牢固、防止材料洩漏。
• 將攪拌杯組立放置於本體上後， 請勿連接或取下容器，
否則馬達將不會運轉。
0_MX-151SG1-050.indd 7
To disassemble Mill
拆解碾磨機
Twist the mill container base
counterclockwise.
1
將碾磨刀座逆時針方向旋轉取下。
2
To assemble Mill
組裝碾磨機
mill container base
3
碾磨刀座
1
mill gasket
2
碾磨機墊圈
Twist the mill container base clockwise to mount it.
• Make sure that the gasket is positioned properly, and
check that the mill container base is tightened securely
to prevent leakage.
將碾磨刀座順時針方向旋轉裝上
• 正確裝好墊圈，以使容器牢固、防止材料洩漏。
7
2010/05/24 11:31:13