Related Manuals for Miele W 6073
Summary of Contents for Miele W 6073
- Page 1 Operating Instructions Washer-Extractor W 6073 (MC 23) It is essential to read these operating instructions before installing or using the machine, to avoid the risk of accident or damage to the machine. M.-Nr. 06 006 840...
- Page 2 M.-Nr. 06 006 840...
-
Page 3: Table Of Contents
Contents Warning and Safety Instructions ..........4 Caring for the environment . -
Page 4: Warning And Safety Instructions
Faulty components should only be ex- On no account must solvents of the kind changed for Miele original spare parts. used for dry cleaning be used in this ma- Only when these parts are fitted can the chine. There may be the danger of fire or ex- safety standards of the machine be guaran- plosion. - Page 5 Warning and Safety Instructions Local regulations regarding regular in- Chlorine or agents containing chlorine spection and maintenance of this ma- are corrosive, and can under certain chine must be observed. (In Germany this conditions lead to irreperable damage to machine is subject to laundry regulations components.
- Page 6 Use of accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims may be invalidated. Disposal of old machines or appliances When disposing of an old washer extrac- tor first make it unusable.
-
Page 7: Caring For The Environment
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are envi- ronmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. -
Page 8: Guide To The Machine
Guide to the machine W 6073 washer extractor with drain valve or drain pump option 1 -Detergent dispenser box 7 -Cable entry for extra equipment 2 -Control panel 8 -Cable entry for dispenser pumps 3 -Drum door 9 -Cable entry for power supply... - Page 9 Guide to the machine Push button switches Additional display min / °C Time display h(rs)/min(s) Door This display shows how long the wash Opens the drum door, releases the programme still has to run or with "Delay "With pre-wash" or "Starch" or "No final spin"...
- Page 10 Guide to the machine Programme sequence indicator lights Programme and Temperature selector On/Start Pre-wash Main wash Rinses Rinses Rinses/Starch Drain Final spin Water inlet/drain Programmes A Cottons B Minimum iron C Delicates/Synthetics Spin speed (rpm) selector D Woollens E Short programme F Separate Rinse G Separate Spin H Separate Drain...
- Page 11 Guide to the machine Detergent dispenser compartments Compartment i - Pre-wash Compartment j - Main wash Compartment y - Liquid bleach Compartment p - Fabric conditioner M.-Nr. 06 006 840...
-
Page 12: Washing
Before using for the first time Preparing the wash load The first commissioning of the machine should be carried out only by a Miele ser- vice technician or an authorized Miele Service Dealer. It is essential that the machine is installed and connected to power, water and drain- age correctly. -
Page 13: Programme Selection
Washing Maximum load (weight of dry washing): A Cottons 7.5 kg B Minimum iron 3.0 kg C Delicates/Synthetics 1.5 kg D Woollens 1.5 kg E Short programme 7.5 kg ^ Add detergent for the main wash to com- partment j - and if required detergent for the pre-wash to compartment i, fabric conditioner to compartment p and liquid bleach to compartment y . -
Page 14: Opening The Drum Door At The End Of The Programme
Washing Opening the drum door at the end of the programme ^ Additionally select pre-wash if required but only with programmes A,B,C,E. After the " r End " indicator lights up: Press the "+i with pre-wash" button. ^ Press the " a Open door" button - the drum door opens. -
Page 15: Dispensing Detergent
Dispensing detergent Fabric conditioner / Starch Water hardness levels Hardness German Hardness Water level in hardness range quality mmol/l level °d soft 0 – 1.3 0 - 7 medium 1.3 – 2.5 7 - 14 hard 2.5 – 3.8 14 - 21 very hard over 3.8 over 21... - Page 16 Dispensing detergent Powder and liquid starch ^ Prepare and dispense the starch solution as stated on the packaging. Automatic dispensing of liquid starch ^ Pour the liquid starch into compartment p (do not exceed the marker level). ^ Close the compartment lid. Adding liquid or powder starch by hand ^ Select the programme required and also push in the "Starch m"...
-
Page 17: Additional Functions
Additional functions By pressing one or more buttons Cancelling a programme programmes can be adapted to offer addi- Turn the programme selector to " r End". tional functions. The indicator lights flash through the other programme stages until the " r End" light is +i "with pre-wash"... -
Page 18: Selecting A Programme With A Coin Unit In Use
Additional functions Delay Start Programmable functions After the drum door has been shut and a It is possible to programme additional func- programme chosen the "m min Time" light tions or change programme sequences. See flashes as a reminder of the "Delay start" op- Programme changes. -
Page 19: Programme Changes
Programme changes To change individual programmes by To access programming mode re-programming Programmes can be changed individually to accommodate different wash processes and methods. 20 Programmable functions can be changed with up to 4 Options. Before starting: ^ After the drum door is shut the "+i with The on-site mains switch must be switched pre-wash"... - Page 20 Programme changes ^ Press the " a " open door button. Example: Changing the temperature holding time in the main wash from 10 minutes to 5 or 15 or 20 minutes. 15 minutes is required. Option 3 corresponds to 15 mins.; see Programme Change Chart No.8 / B 95 Tem- perature holding time in minutes.
- Page 21 Programme changes Programme selector setting Options Enter programmed Programme function options Standard Additional pre-wash 1 A 95 Wash time: (mins) no pre-w. 2 A 80 Water level: high Pre-wash 3 A 70 Select pre-wash via button gen/lly yes 4 A 60 Wash times: (mins) 5 A 50 Temperature: (°C) 6 A 40 Water level: high...
-
Page 22: Cleaning And Care
Do not use any scouring agent or solvent cleaner. If you are unsure about a particular product or need further advice please contact your nearest Miele Sales office. See back page ^ Open the drain access flap. for address. ^ Place a 2 litre capacity dish underneath Remove any deposits from the door seal the drain fixture. - Page 23 If replacing the inlet hose only use a hose able to withstand pressure up to 70 bar. Miele’s own hoses meet this requirement. Cleaning the filters in the water inlet The washing machine has the following fil- ters to protect the inlet valves: –...
- Page 24 Cleaning and Care ^ After use the detergent box should be To clean the filter in the water inlet valve: cleaned with warm water to remove any ^ Using pliers, carefully loosen the ribbed detergent residues. plastic nut on the inlet valve, and unscrew. ^ The siphon tubes in compartments §...
-
Page 25: Problem Solving Guide
Problem solving guide Drain valve version: Any work on the electrical components of ^ Turn the programme selector to " r End". this machine should only be carried out ^ Open the drain valve access flap (see by a suitably qualified and competent person. - Page 26 If it is adequate there may be a technical fault. In this case, call your local service The siphon tube is either incorrectly posi- dealer or the Miele Service Department. tioned or clogged. ^ Lift the lid and remove the siphon.
-
Page 27: Possible Reasons For Increased Levels Of Foaming
Problem solving guide Possible reasons for increased Laundry is either not spun at all or not spun satisfactorily. levels of foaming ^ The " w No final spin" button was pushed – detergent type ^ Only use detergent formulated for use in commercial washer extractors. -
Page 28: After Sales Service
After sales service Should a fault occur please contact your nearest authorized Service Dept. When contacting the Service Department, please quote the model type, (Typ), the ma- chine number, (Fabr.-Nr.) und Part-no. (M.-Nr.). These can be found on the data plate: With the door open at the top of the door ring, or: at the rear of the machine towards the top. -
Page 29: Explanation Of Symbols On The Data Plate
21 Water registration DVGW-test cert (Water)* (measured in Germany in accordance with 22 Field for CE test symbol..DIN (IEC) 45 635, machine noise regulations (Product-ID-No./Gas)* 3. GSGV p1. 1.a) *) not applicable to W 6073 M.-Nr. 06 006 840... -
Page 30: Notes For The Installer
They must be re-fitted if the machine is moved again. If there is not already a concrete plinth on-site, the Miele Spare Parts department of- The machine must not be moved without fer a steel plinth. It must be ensured that the all the outer panels in place. -
Page 31: Connection To Water Supply
70 bar and a temperature of 90°C. This also applies to all connection parts. Miele "Original" spare parts meet this re- quirement. ^ Screw the foot or feet out until the machine stands level. -
Page 32: Electrical Connection
Hook the hose over the edge and ing the heating is given in mm column of wa- secure. ter: W 6073 45 mm column of water Make sure the water can flow away freely to avoid flooding and to prevent water from The voltage and frequency are given on the being sucked back into the machine. - Page 33 M.-Nr. 06 006 840...
- Page 34 Alteration rights reserved 15.04 This paper consists of cellulose which has been bleached without the use of chlorine...