Acer Altos R360 F2 Frequently Asked Questions Manual page 74

Altos R360 F2 FAQ (Frequently Asked Questions)
a. Please press CTRL-G to start the RAID BIOS utility during POST
b. In the Home page, click on the physical or logic HDD that you want to locate. Then, select the "Locate"
option and click Go
RAID utility in Windows/Linux:
•
a. Launch the RAID utility
b. Click the physical HDD desired in Physical tab
c. Right click the on the HDD. Then, select "Start Locating Drive"
To stop the LEDs from blinking, select "Stop Locating Drive"
17. What is the default setting of disk write cache of the integrated RAID Module RMS25CB040/RMS25CB080?
ANSWER: ANSWER: The default setting of disk cache of virtual drive is Unchanged. ANSWER: ANSWER:
18. How do I enable/disable disk write cache of the integrated RAID Module RMS25CB040/RMS25CB080?
ANSWER: You can enable/disable disk write cache through RAID BIOS Utility during POST or RAID utility in ANSWER:
ANSWER: ANSWER:
Windows/Linux.
RAID Utility in Windows/Linux.
•
a. Please launch the RAID utility in Windows/Linux.
b. Right click the Virtual Drive in Logical panel
c. Click Set Virtual Drive Properties Set Virtual Drive Properties
Set Virtual Drive Properties Set Virtual Drive Properties
74