Common Service Commands And Navigation Commands - Panasonic KX-TVA50 Subscriber's Manual

2.6 Common Service Commands and Navigation Commands

2.6 Common Service
Commands and
Navigation Commands
Commands for Changing the Current
VPS Service
After going off-hook and dialing an
extension number of the VPS, you can enter
a service command to access certain VPS
features quickly. While VPS guidance is
being provided, you can also use service
commands to, for example, switch to a
different VPS service mode. Some of the
more commonly used commands are listed
below. For a complete list, see 8.2 Service
Access Commands.
Activates Custom Service. You
# 2
will be guided to enter a Custom
Service number (1–100).
Activates Voice Mail Service.
# 6
You can record a message for
another subscriber by entering
his or her mailbox number when
guided. You can also log in to
your mailbox by entering this
command followed by [ ] and
your mailbox number.
Activates Automated Attendant
# 8
Service. You can call an
extension by dialing the desired
extension number when guided.
If the called party does not
answer, the VPS can offer you
other options, such as leaving a
message, calling the operator,
etc. Note that these options are
available only when calling the
extension via Automated
Attendant Service, i.e. after you
have entered this service
command.
14 Subscriber's Manual
When Using Voice Prompts
The following commands can be used to
help you navigate through VPS menus.
Takes you back to the previous
menu.
Repeats the current menu.
0
Takes you back to the Main
# 7
Menu.
When Using VM Menu
Switches you to the Main Menu
# #
(top menu) of the prompts.
Commands for Recording Messages
After going off-hook and dialing an
extension number of the VPS, you can enter
the following commands to record
messages.
Accesses No Answer
# 9 1
Greeting. You can record a
No Answer Greeting by
entering this command.
Accesses Owner's Name.
# 9 2
You can record an Owner's
Name by entering this
command.
Document Version 3.0 2010/06