Hitachi E100 Safety Instructions And Instruction Manual page 19

AC APPLICATION
1. Ground the generator, using the ground terminal located at the side of the panel. (Refer to
"GROUNDING THE GENERATOR", page 7.)
2. Before starting the engine, check that the AC switch (no-
fuse breaker) of the generator and the power switches of
the appliances are turned off.
3. Connect the plugs of the appliances to the receptacles
before starting the engine.
4. Start the engine and check that the voltage meter is
indicating correct voltage.
English
"I" (ON)
"O" (OFF)
Fig. 21
Fig. 22
Fig. 23
19