Dns Relayer Settings; Enable Dns Relayer - D-Link DFL-1100 Manual

Hide thumbs Also See for DFL-1100:

Table of Contents

DNS Relayer Settings

Click on Servers in the menu bar, and then click DNS Relay below it. The DFL-1100

contains a DNS relayer that you can be configured to relay DNS queries from the internal LAN

to the DNS servers used by the firewall itself.

Follow these steps to enable the DNS Relayer.

Step 1. Enable by checking the Enable DNS Relayer box.

Step 2. Enter the IP numbers that the DFL-1100 should listen for DNS queries on.

Note: If "Use address of LAN interface" is checked, you don't have to enter an IP in IP

Address 1 as the firewall will know what address to use.

Click the Apply button below to apply the setting or click Cancel to discard changes.

Table of Contents