COLOR TELEVISION Chassis : KS9C(N)MI Model : CL21M40MQGXXAO SERVICE Manual COLOR TELEVISION FEATURES ■ Turbo Sound Sound Equalizer ■ ■ ■ New Structure Design CL-21M40MQ...
Some of the contents may be changed subject to the sales location and the product specifications. 2. When replacing the Main Board : Focus adjustment, screen voltage setting and W/B adjustment are all required. 3. When replacing the CRT Ass'y : No adjustments required. Samsung Electronics...
2. The initial screen of Service Mode. ADJUST OPTION G2-ADJUST CHCKSUM RESET T-FMTNUS 3. Functions of the Keys within Service Mode MENU Show all menus Move the cursor to select an item. ▲ / ▼ Adjust the selected configuration value ◀ / ▶ Samsung Electronics...
★ The underlined are items applied during the service adjustment. None of the others should be adjusted. 1.T-FMTNUS Item Adjust/Fix Initial Remark Adjust Adjust Adjust Adjust Adjust Adjust Adjust Adjust Adjust Adjust MVOL RPO0 RPO1 FMWS AGCS SCBT DNSR DSBT DCDL DBLR DBLB Samsung Electronics...
Page 8
Start Language English English at time of purchase Hotel Mode Blue Screen Blue Screen when there is no source signal V-Chip AV Option AV1/2/DVD/SV AV1/2/DVD Back Jack Option 3.White Balance Item 21"FLAT Remark Hight Light 275/265/45FL Low Light 275/265/1.5FL Samsung Electronics...
② Press "Power Off →MUTE→1→8→2→Power On " ① Display the Lion pattern. using the remote control and enter Factory Mode. ④ Adjust the VA, VS,VSL and HS items so ③ Enter Deflection Mode. that the width becomes 5 and the height becomes 4. Samsung Electronics...
Page 11
③ Adjust the V-Linearity and V-SC settings so that the intervals of the horizontal lines become uniform. ④ When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed. If there is no change, finish the adjustments. Samsung Electronics...
3-5 Replacements & Calibration 3-5-1 Adjusting the Focus 1. Display the CROSS Hatch pattern. 2. Turn the Focus clockwise to the optimal position. 3. Slowly turn the Focus clockwise so that the cross line is the most clearly displayed. Samsung Electronics...
Page 13
1. Select "Power Off →MUTE→1→8→2→Power On " to enter Service Mode. 2. Turn to toshiba pattern 3. Use remocon come into " G2 Adjust" mode by hand or automatically. 4. Turn Screen VR of FBT and confirm the characters below changed to GREEN. Samsung Electronics...
Page 14
4. When the adjustment is finished, check the following checklist. - If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again. - If there is a ghost line on the screen, adjust the Screen Voltage again. 3-10 Samsung Electronics...
Schematic Diagram 10. Schematic Diagram 10-1 Power This Document can not be used without Samsung’s authorization. Power TP01 Signal TP01 TP02 TP02 TP04 TP08 TP04 TP08 Samsung Electronics 10-1...
Schematic Diagram 10-2 Micom This Document can not be used without Samsung’s authorization. TP04 TP04 TP10 TP09 TP11 TP11 Power Signal TP09 TP10 TP11 TP12 TP13 TP12 TP13 10-2 Samsung Electronics...
* The signals were processed by MICOM, then output. * This chassis's MICOM is same as KS9A, it use UOC CHIP. * The external port be consists of AV input and output,each of them has three channels,Audio are White and Red, Video is Yellow Video(Yellow). Samsung Electronics 13-1...
* TDQ-6F/13F2S(TUNER):Receives the RF signal and output a fixed IF to Micom. * Micom Block consists of five aspects as: Video & Sound IF Processor, Video Processor, Display and Deflection Processor and Controller, OSD,Text Processing. * TUNER-F/S;TDQ-6F/13F2S(tuner) : RF signal processing , Output IF signal 13-2 Samsung Electronics...
Circuit Description 13-2-2 Power Block AM P 13V Audio AM P EEPROM M ICOM A+5V B+3.3V IC802(7632) B+8V B+5V Q804(KSC2073-H2) 125V A+5V ± 16.5V Vertical AM P B+33V TUNER B+180V Video AM P SCREEN FOCUS HEATER Samsung Electronics 13-3...