Using A Household Power Outlet - Canon EOS-1 D X Mark II Instruction Manual

Using a Household Power Outlet

You can power the camera with a household power outlet by using the
DC Coupler DR-E19 and AC Adapter AC-E19 (both sold separately).
Disconnect button
Power lamp
Do not use an AC adapter other than the AC-E19 (sold separately).
Since the DC coupler and AC adapter are not water-resistant, do not get
them wet.
While the camera's power switch is on, do not connect or disconnect the
power cord or connector or disconnect the DC coupler.
If the camera's power switch is on and you do steps 2 and 3, it may take
a while before the camera turns on.
After using the camera, unplug the power plug from the power outlet.
To disconnect the connector, hold down the disconnect button and pull
the connector.
You can also use AC Adapter Kit ACK-E4.
Insert the DC coupler.
1
Insert the DC coupler firmly all the way
into the camera, and turn the release
handle as shown by the arrow.
Connect the DC coupler to the AC
2
adapter.
Securely connect the DC coupler's
connector to the AC adapter's connector.
Connect the power cord.
3
The AC adapter's power lamp will light.
Connect the power cord to the AC
adapter and insert the power plug into
a power outlet.
Set the camera's power switch to
4
<1>
(p.53)
.
483