Safety Guides - Kenmore 625.388400 Owner's Manual

S
E
C
T
N
IJJ_JJJ_JJ_JJJJ_
I_JJJJJJJJJJJJJJ_
IJJ_JJJJ_J_
iJJJ J_JJ_Jjj_j_
iJ_ JJJJ_JJJ_J
iJJJ_ _JJjjjjj_
i_ _J_J_JJ_U
iJ_J_ _JJ_Jjjj_
i_ _JJJ_JJ_Jj_
iJJ_J_JJJ_JJ_J
IJ_JJJJ_J_JJ_J
MJJJJJJ_JJJJJJj_
A. SAFETY GUIDES
• Read all steps, guides and rules carefully before
installing and using your new water softener. Follow
all steps exactly to correctly install. Failure to follow
them could cause personal injury or property damage.
Reading this book will also help you to get all of the
benefits from your water softener.
• Your water softener will remove hardness minerals
and "clear water" iron from water, up to the limits
shown on page 4-1. It will not remove other types of
iron, acids, tastes and odors, etc. It will not purify pol-
luted water or make it safe to drink.
• Protect the softener and piping from freezing. Dam-
age from freezing voids the softener warranty. See
page 3-3.
CAUTIONS
PLEASE READ AND COMPLY WITH THE FOLLOWING
GUIDES TO PREVENT DAMAGE TO THE SOFTENER
OR OTHER PROPERTY, PERSONAL INJURY, OR POS-
SIBLE FATAL SHOCK.
• THIS SOFTENER WORKS ON 24 VOLTS ONLY. BE
SURE TO USE ONLYTHE TRANSFORMER INCLUDED,
AND PLUG IT INTO A HOUSEHOLD 120V OUTLET. IF
TRANSFORMER IS REPLACED, USED ONLY THE AU-
THORIZED SERVICE CLASS II, 24 VOLT, 10 VA TRANS-
FORMER.
• Unplug the transformer right away if the power
cable sould become damaged or frayed. Make repairs
before plugging back into the power outlet.
• Always unplug the softener from electrical power
before removing outer valve covers.
• This systems is not intended to be used for treating
water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after
the system.
1-1