Wlan Module - HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual

WLAN module

Description
Intel Dual Band Wireless-AC 7265 NV
Intel Dual Band Wireless-AC 8260 + Bluetooth 4.0
Intel Dual Band Wireless-AC 3165 + Bluetooth 4.0
HP WLAN 802.11 a/b/g/n + Bluetooth 4.0
The WLAN module is secured with one Phillips screw and has two connected antennas. It is located under the
hard drive.
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. If your model is an EliteDesk 800 or MP9, remove the secondary fan
MP9 models only) on page
5. Remove the drive cage
6. Locate the WLAN module on the system board.
7. Disconnect both antenna cables from the WLAN module.
NOTE:
connect the antenna cables.
8. Grasp the WLAN module by the sides and pull it out of the socket.
9. Insert the new WLAN module into the socket on the system board.
NOTE:
10. Press the WLAN connectors firmly into the socket (1).
11. Press the WLAN module down to the system board and use the included screw to secure the module (2).
30 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Top cover on page
(Hard drive on page
26).
(Drive cage on page
You may need to use a small tool, such as tweezers or needle-nose pliers, to disconnect and
A WLAN module can be installed in only one way.
(Preparation for disassembly on page
21).
23).
27).
20).
(Secondary fan (EliteDesk 800 and