Yamaha PSR-S670 Reference Manual page 39

Hide thumbs Also See for PSR-S670:
Table of Contents

Advertisement

When NTR is set to GUITAR
ALL-PURPOSE
STROKE
ARPEGGIO
3 HIGH KEY / NOTE LIMIT
The settings here adjust the Octave of the notes converted from the original ones through NTT and NTR.
[4 ]/
HIGH KEY
[5 ]
[6 ]
NOTE LIMIT
LOW
[7 ]
NOTE LIMIT
HIGH
4 RTR (Retrigger Rule)
These settings determine whether notes stop sounding or not and how they change pitch in response to
chord changes. Use the Cursor buttons [4 ]–[7 ] to select one of the following types.
STOP
PITCH SHIFT
PITCH SHIFT TO
ROOT
RETRIGGER
RETRIGGER TO
ROOT
This table covers both stroke- and arpeggio-played sounds.
Suitable for strumming sounds of the guitar. Some notes may sound as if
they are muted—this is the normal condition when chords are played on
guitar by strumming.
Suitable for arpeggio-played sound of the guitar, resulting in beautiful four-
note arpeggio sounds.
This sets the highest key (upper octave limit) of the note transposition for
the chord root change. Any notes calculated to be higher than the highest
key are transposed down to the next lowest octave. This setting is avail-
able only when the NTR parameter
Example—When the highest key is F.
Root changes
Notes played
These set the note range (highest and lowest notes) for Voices recorded to
the Style channels. By judicious setting of this range, you can ensure that
the Voices sound as realistic as possible—in other words, that no notes
outside the natural range are sounded (e.g., high bass sounds or low pic-
colo sounds).
Example—When the lowest note is C3 and the highest is D4.
Root changes
Notes played
The notes stop sounding.
The pitch of the note will bend without a new attack to match the type of the
new chord.
The pitch of the note will bend without a new attack to match the root of the
new chord. However, the octave of the new note remains the same.
The note is retriggered with a new attack at a new pitch corresponding to the
next chord.
The note is retriggered with a new attack at the root note of the next chord.
However, the octave of the new note remains the same.
(page
37) is set to "Root Trans."
PSR-S670 Reference Manual
2
High Limit
Low Limit
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents