Replacing The Battery - Motorola 9 User Manual

Recharging the Batt ery
Recharging can be accomplished by placing your Accompli 009 in the desktop holder. For
optimum performance, use the recommended Motorola equipment.
1. Insert the rapid charger
connector into the back of the
desktop holder.
Before leaving on a trip, make sure the battery and any extra batteries are fully charged.
Recharging the battery to full charge usually takes about two hours or less per battery. All
rechargeable batteries experience self-discharge, meaning that a small amount of energy
discharges every day as a battery sits on the shelf.

Replacing the Battery

If your battery's performance has degraded (e.g., the battery's charge lasts only half as long
as when it was new), consider replacing your battery with a new Motorola battery.
2. Plug the rapid charger into an
electrical outlet.
T h e B a t t e r y a n d C h a r g e r
3. Slide your device, face up, into
the desktop holder. A red light
appears indicating that the
battery is charging.
(If the red light flashes for more
than 20 seconds, your battery
may be defective.)
4. A green LED indicator on the
desktop holder indicates that the
battery is charged.
Using Accompli 009 27