Administrator's Handbook
Factory Reset Switch
Lose your password? This section shows how to reset the Motorola Netopia® Router so that you can
access the configuration screens once again.
☛
NOTE:
If you don't have a password, the only way to access the Motorola Netopia® Router is the following:
Referring to the following diagram, find the round Reset Switch opening.
1.
DSL
DSL
Carefully insert the point of a pen or an unwound paperclip into the opening.
2.
❑ If you press the factory default button for less than 1/2 a second, the unit will continue to run as
normal.
❑ If you press the factory default button for 1 second, when you release it, the Gateway will perform a
factory reset, clear all settings and configurations, and reboot. Do not hold the button down too long
(5 – 10 seconds). This will destroy any saved default settings as well.
126
Keep in mind that all of your settings will need to be reconfigured.
7000-series
LAN
4
3
2
1
Power
Off/On
Factory Reset Switch:
Push to clear all settings
3347-02
4
3
LAN
2
1
Power
Off / On
Factory Reset Switch:
Push to clear all settings
2247-series
ON
OFF
RESET
4
3
2
1
DSL
ETHERNET
POWER
Factory Reset Switch:
Push to clear all settings
2240N
Factory Reset Switch:
Push to clear all settings
2241N
Factory Reset Switch:
Push to clear all settings
2246N
Factory Reset Switch:
Push to clear all settings